topic Re: make_recovery in Operating System - HP-UX

make_recovery

Veronica Chavez — Mon, 28 Jun 2004 15:08:50 GMT

El servidor en el cual esta instalado el Ignite UX Server puede ser un cliente, para ejecutar un make_recovery utilizando Ignite-Ux Graphical User Interface??

Re: make_recovery

Steven E. Protter — Mon, 28 Jun 2004 15:32:27 GMT

make_recovery is obsolete.

Use make_tape_recovery

#!/usr/bin/sh
/opt/ignite/bin/make_tape_recovery -Av -x inc_entire=vg00

Answer to your question: si

SEP

Re: make_recovery

Robert-Jan Goossens — Mon, 28 Jun 2004 15:33:20 GMT

Hi Veronica,

Hope I understand your question well.

The make_recovery is a local command, if you run make_recovery you will get a bootable tape which can be used to recover or clone your server.

make_net_recovery will create an image on your ignite server ( or you could use the graphical ineterface ) which can be used to boot from a lan interface.

Hope this helps,
Robert-Jan

Re: make_recovery

Veronica Chavez — Mon, 28 Jun 2004 16:39:54 GMT

Re: make_recovery

Sridhar Bhaskarla — Mon, 28 Jun 2004 17:39:37 GMT

Hi,

SÃ. Usted puede crear una cinta del make_tape_recovery de la cinta del make_net_recovery del servidor de Ux del encender tambiÃ©n. Sin embargo, usted puede tambiÃ©n utilizar comando del make_tape_recovery de la lÃnea de comando en el cliente a que usted estÃ¡ intentando a la reserva. Sugiero el comando siguiente -make_tape_recovery - v - x inc_entire=vg00 - i - un /dev/rmt/0mn

Observe que el make_recovery ha sido substituido por make_tape_recovery.

I am sorry if I messed up anything in my translat