topic Re: Problems With 11.00 on Ignite server on Faster Processor Systems in Operating System - HP-UX

Problems With 11.00 on Ignite server on Faster Processor Systems

Heather Considine — Wed, 08 Sep 2004 08:36:30 GMT

I am trying to ignite an rp5470 and a N4000 that have 875Mhz and 750MHz processors. They seem to go through the ignite process fine but when it goes to reboot I recieve a system panic
panic: set_machine_parameters_64: Unidentified cpu type returned from PDC_MODEL
The image works for our machines with slower processors. Any help would be appreciated.

Re: Problems With 11.00 on Ignite server on Faster Processor Systems

Pete Randall — Wed, 08 Sep 2004 08:40:36 GMT

I believe you have to apply the latest Hardware Enablement (HWE) patch bundle before you create the ignite image.

Pete

Re: Problems With 11.00 on Ignite server on Faster Processor Systems

Jeff Schussele — Wed, 08 Sep 2004 08:50:52 GMT

Hi Heather,

On the PA-8700+ (875 MHz) systems *only* HP-UX 11.11 (11i) is supported. 11.0 & 11.11 are supported on the PA-8700 (750 MHz) systems. As Pete states, you probably need the latest HWE bundle on that 750 MHZ N4000 system, but you'll have to run 11.11 on that rp5470 if it has the PA-8700+ CPU. If it has a 750 MHz PA-8700, then you could run 11.0 on it.

HTH,
Jeff

Re: Problems With 11.00 on Ignite server on Faster Processor Systems

Heather Considine — Wed, 08 Sep 2004 08:58:25 GMT

I am using a generic 11.00 image off of our ignite server. I copied the latest HWE patches to the depot and it still didn't work.

Re: Problems With 11.00 on Ignite server on Faster Processor Systems

Jeff Schussele — Wed, 08 Sep 2004 09:08:51 GMT

Hi (again) Heather,

The HWE patches must be *in* the image. Won't work by laying down the image & then applying the HWE patches. You'll have to apply the HWE patches to something & then recreate the image from it.

Rgds,
Jeff

Re: Problems With 11.00 on Ignite server on Faster Processor Systems

Heather Considine — Wed, 08 Sep 2004 09:13:27 GMT

OK so I have my 11.00 core depot, I copied the HWE Patches in to it. And it does come up when I ignite and I can choose it under the software Tab, I choose it and it still does not work.

Re: Problems With 11.00 on Ignite server on Faster Processor Systems

Patrick Wallek — Wed, 08 Sep 2004 09:20:52 GMT

What Jeff is saying is that you must actually INSTALL (via swinstall) the latest HWE bundle on a blank system, and then recreate your 11.0 Ignite image.

You should then be able to do your install.

Re: Problems With 11.00 on Ignite server on Faster Processor Systems

Heather Considine — Wed, 08 Sep 2004 09:30:00 GMT

When you first create your ignite server you have the option to do setup, and during that same you can create a depot by copying a CD that is how I created my core depots. What if I didn't have a system to load to create a genric image from?

Re: Problems With 11.00 on Ignite server on Faster Processor Systems

Jeff Schussele — Wed, 08 Sep 2004 09:36:52 GMT

Then you'll have to recreate your core depot from a newer release CD. I suspect the release date from which you initially created your core depot does not support the faster processes.
If you have a SW support contract with HP they can & will supply you with a new release CD set.

Rgds,
Jeff

Re: Problems With 11.00 on Ignite server on Faster Processor Systems

Sanjay_6 — Wed, 08 Sep 2004 10:27:47 GMT

Hi,

As part of the install procedure you are installing patches PHKL_23813/23814/23815. all these patches have been superceded. Try and add the newer patches for all three of these patches and then retry.

the latest patch for these three patches are,

PHKL_23813 -> PHKL_31867 (hprecomm: PHKL_28766)
PHKL_23814 -> PHKL_29256
PHKL_23815 -> PHKL_27553

Hope this helps.

regds