topic Re: Ignite with Veritas Volume Manager in Operating System - HP-UX

Ignite with Veritas Volume Manager

Chad Scheer — Thu, 29 May 2003 11:50:17 GMT

I loaded a system, from scratch, with Veritas Volume Manger. Ran make_sys_image to place the new vxfs image on my test ignite server. Ignited a server from that image. The image gets restored, but is using LVM instead of Veritas.

Re: Ignite with Veritas Volume Manager

Pete Randall — Thu, 29 May 2003 11:53:52 GMT

Sorry, Chad, but I've got to think that's a feature. I've been unable to come up with any concrete reason to go with VVM. Ignite unconverted for you!

Pete

Re: Ignite with Veritas Volume Manager

Cheryl Griffin — Thu, 29 May 2003 12:16:37 GMT

What options did you use when you make the image? Check the man page, search for newconfig.

In addition, check your Ignite version to make sure that VxVm is being handled properly. Check the release notes for changes:
http://www.software.hp.com/products/IUX/docs/release_note.html

Download the software:
http://www.software.hp.com/products/IUX/download.html

Re: Ignite with Veritas Volume Manager

Chad Scheer — Thu, 29 May 2003 15:03:43 GMT

No special options. Just the defaults to automatically put it out on the ignite server. We are running version 4.1.61 of Ignite. There are no errors. I do notice that the first thing that ignite does when loading the client is to create vg00. Very strange that it is my image, but somewhere it is being converted to LVM.

Re: Ignite with Veritas Volume Manager

Steven E. Protter — Thu, 29 May 2003 15:13:37 GMT

Actually you are kind of lucky. To get Ignite's make_config and save_config commands to work properly, I had to rip vxvm out of the system entirely.

I get the impression since the merger that HP is backing away from vxvm. That is just an opinion though.

SEP

Re: Ignite with Veritas Volume Manager

Chad Scheer — Thu, 29 May 2003 16:11:30 GMT

I just got off the phone with HP support and they said to try save_config first. I will give that a shot and post the results.

Re: Ignite with Veritas Volume Manager

Chad Scheer — Mon, 02 Jun 2003 12:15:16 GMT

Problem was in the cfg file. Had to modify "Disk and Filesystem" area to specify veritas info. Used a save_config from a running VXFS system to help build a template.

Re: Ignite with Veritas Volume Manager

Scott Pruzinsky — Wed, 30 Jul 2003 08:36:29 GMT

I'm actually trying to achieve the conversion from VxVM (rootdg) to LVM, but be able to convert via bootable tape. "make_tape_recovery" apparently doesn't allow you to change the underlying Volume Manager when you boot off of it, though.

Would anyone be able to offer assistance? I have to convert from VxVM to LVM due to SAN attachment requirements (VxVM must be uninstalled).

HP-UX version: 11.11
Ignite-UX version: B.4.3.123

Thank you,

Scott

Re: Ignite with Veritas Volume Manager

Robert-Jan Goossens — Wed, 30 Jul 2003 09:33:12 GMT

Scott,

Suggest to open a new question on this forum, link it to this question. Reason, it will cause mails to be send to Chat and you are not in controle of this post.

Kind regards,

Robert-Jan.

Re: Ignite with Veritas Volume Manager

Scott Pruzinsky — Thu, 31 Jul 2003 18:26:34 GMT

Robert-Jan,

Thank you for the suggestion--I will go ahead and start a new thread. Please ignore my prior post in the existing thread. :^)

Sincerely,

Scott