topic Re: Ignite error in Operating System - HP-UX

Ignite error

John Ferrara — Tue, 21 Jan 2003 21:53:05 GMT

I receive the following error when creating an Ignite tape:

* Creating Control Configuration.
* Creating Archive File List
ERROR: list_expander returned an error.
ERROR: Failed to get the archive size and the list of files which will be in
archive.

======= 01/21/03 15:40:39 CST make_tape_recovery completed unsuccessfully

I'm on a K210 10.20 A Ignite v.A.3.7.95

John

Re: Ignite error

Pramod_4 — Tue, 21 Jan 2003 23:24:40 GMT

Check Whether you have any files in '/" directory with control charactors (Invisible) in it.

Pramod

Re: Ignite error

Manju Kampli — Tue, 21 Jan 2003 23:59:24 GMT

Do you have the patch PHSS_26498 installed after PHCO_26453.. this patch has warnings and will create circular symbolic links in the /usr/lib/nls/msg/zh_TW.big5 message catalog directory. The presence of these circular links can cause problems with backup programs

Please follow the instructions in the patch warings to fix it and try the ignite backup.

- To address this situation please follow the following
procedure:
1. Confirm both PHSS_26498 and PHCO_26453 are installed:
swlist -l patch PHSS_26498 PHCO_26453
if both patches are not reported as installed, then no
action is required at this time. However, action will
be required if both patches are installed in the future.
If both patches are reported as installed, continue with
step #2.
2. Get into the proper directory:
cd /usr/lib/nls/msg/zh_TW.big5
3. Confirm the presence of the symbolic links:
find . -type l | xargs ls -l
If this several lines similar to the following are
displayed, continue with step #4. Otherwise, skip to
step #6.
lrwxr-xr-x 1 root sys 36 Aug 30 09:07 ./hpterm.cat ->
/usr/lib/nls/msg/zh_TW.big5/hpterm.cat
4. Remove the symbolic links:
find . -type l | xargs rm
5. Restore the backup copies from the save area for
PHSS_26498:
cp -p /var/adm/sw/save/PHSS_26498/X11-TCH-B-MSG/usr/lib/ nls/msg/zh_HK.hkbig5/* .
6. Correct the IPD (Installed Product Database) so that
swverify(1M) does not report errors for fileset
X11.X11-TCH-B-MSG and patch fileset
PHSS_26498.X11-TCH-B-MSG:
1. Create the swmodify "Path" file (e.g.
/tmp/fileselections) containing:
/usr/lib/nls/msg/zh_HK.hkbig5/hpterm.cat
/usr/lib/nls/msg/zh_HK.hkbig5/recserv.cat
/usr/lib/nls/msg/zh_HK.hkbig5/resize.cat
/usr/lib/nls/msg/zh_HK.hkbig5/xclock.cat
/usr/lib/nls/msg/zh_HK.hkbig5/xinit.cat
/usr/lib/nls/msg/zh_HK.hkbig5/xload.cat
/usr/lib/nls/msg/zh_HK.hkbig5/xpr.cat
/usr/lib/nls/msg/zh_HK.hkbig5/xrdb.cat
/usr/lib/nls/msg/zh_HK.hkbig5/xwd.cat
2. Update the IPD for both filesets. Observe that a
swmodify(1M) command must be issued for each of the
filesets to be modified:
swmodify -v -P /tmp/fileselections X11.X11-TCH-B-MSG
swmodify -v -P /tmp/fileselections PHSS_26498.X11-TCH-B-MSG

Hope the above helps,
Manju

Re: Ignite error

T G Manikandan — Wed, 22 Jan 2003 07:54:54 GMT

I am not sure what command options you are using for creating the tape.

Are you using proper -x options.

Revert with the command.

Also post the output of

var/opt/ignite/recovery/latest/recovery.log

Re: Ignite error

John Ferrara — Wed, 22 Jan 2003 16:04:03 GMT

Pramod - No there were no invisible characters in "/"

Manju - No those patches are not installed

T G - Upon review of the ignite log file I discovered that there is an additional entry at the end that was not displayed on the screen:
WARNING:'/usr/lib/X11/app-defaults/Autocal.DA1' is part of a circular link.
ERROR: Circular link error encountered. Aborting.

I don't know why these lines were not displayed on screen during the session. Thanks for the help.

John

Re: Ignite error

John Ferrara — Wed, 22 Jan 2003 16:09:45 GMT

I do have another problem w/ Ignite on a different server:

======= 01/16/03 17:53:29 GMT Started ./make_tape_recovery. (Thu Jan 16
17:53:29 GMT 2003)
@(#) Ignite-UX Revision A.3.7.95
@(#) net_recovery (opt) $Revision: 10.575.1.1 $

* Testing pax for needed patch
* Passed pax tests.
* Checking Versions of Ignite-UX filesets
* Creating System Configuration.
* /opt/ignite/bin/save_config -f
/var/opt/ignite/recovery/2003-01-16,17:53/system_cfg vg00
save_config: error - vg00 not in the volume/disk group
ERROR: /opt/ignite/bin/save_config failed

======= 01/16/03 17:53:51 GMT make_tape_recovery completed unsuccessfully

Any thoughts???

John

Re: Ignite error

John Dvorchak — Wed, 22 Jan 2003 16:33:36 GMT

I have seen the second problem you note a couple of years ago. As I remember it you have a corrupted /etc/mnttab file. Save it to a backup file like mv /etc/mnttab /etc/mnttab.sav and issue the mount -a command. This will rebuild it for you. Once you confirm that all is ok with the mnttab file you can remove the saved version.

You should probably do a search on the ITRC forums for mnttab to see if my memory has failed or not.

Re: Ignite error

John Ferrara — Wed, 22 Jan 2003 17:01:46 GMT

John,

I tried your suggestion foe mnttab. It had no effect.

John

Re: Ignite error

John Ferrara — Wed, 22 Jan 2003 17:18:13 GMT

I found another message that tried lvlnboot -R /dev/vg00. However, this did not work either.

John