topic Re: Ignite Ux in Operating System - HP-UX

Ignite Ux

Rogelio Ordinario — Thu, 27 Jun 2002 12:00:55 GMT

Is there a way I could use the ignite tape that I have for a K570 with 64bit HPUX 11
to clone my other K410 and use 32 bit instead.
Please advise if possible. Thanks

Re: Ignite Ux

Patrick Wallek — Thu, 27 Jun 2002 16:07:49 GMT

As far as I know, NO that is not possible.

With the tape from you K570 you've got only 64-bit stuff on the tape, not 32.

You'll have to install your K410 from media or from a tape created on a 32 bit system.

Re: Ignite Ux

Jordan Bean — Thu, 27 Jun 2002 16:31:14 GMT

The least you can do with that tape is boot into a recovery shell or network install because the tape boot kernel is HPUX 11.11 (Ignite version B) or 10.20 (version A).

I don't... It may actually allow you to restore the archive, but the host won't boot off it because it is 64-bit.

Hey, what procs are in the K410? If their 64-bit, perhaps all it needs is a firmware update to support 64-bit HPUX.

Re: Ignite Ux

Victor_5 — Thu, 27 Jun 2002 16:32:26 GMT

I don't think you can do so, it is not real "clone".

Re: Ignite Ux

Jordan Bean — Thu, 27 Jun 2002 16:32:57 GMT

(My grammar is terrible. Would you give me ten points for honesty?)