https://community.hpe.com/t5/operating-system-hp-ux/make-recovery-743-vs-744-processor/m-p/2569481#M519869 I don't know the detail. But you can try to install the lastest version of Ignite. <BR />I ever met such situation in N4000.<BR /><BR />:) Mon, 27 Aug 2001 01:10:49 GMT Edward Lu 2001-08-27T01:10:49Z https://community.hpe.com/t5/operating-system-hp-ux/make-recovery-743-vs-744-processor/m-p/2569480#M519868 Hardware is 743 processor on a vme, running HP-UX 10.20, with a Seagate DAT drive. I can do a make_recovery with success, and restore that recovery to the same machine. <BR /><BR />I put in a 744/132 and can successfully do a make_recovery, however, when I attempt to restore, I get a IPL error -5. <BR /><BR />What happened in-between the 743 and 744? I can find no patches or any related info. <BR /><BR />A succesful make_recovery/restore can be done if I replace the Seagate with an HP DAT drive, however, a large purchase was made of the Seagates, due to the success of Seagates in the 743's. <BR /><BR />Thanks <BR />Greg Thu, 23 Aug 2001 19:31:22 GMT https://community.hpe.com/t5/operating-system-hp-ux/make-recovery-743-vs-744-processor/m-p/2569480#M519868 Greg Huber_2 2001-08-23T19:31:22Z https://community.hpe.com/t5/operating-system-hp-ux/make-recovery-743-vs-744-processor/m-p/2569481#M519869 I don't know the detail. But you can try to install the lastest version of Ignite. <BR />I ever met such situation in N4000.<BR /><BR />:) Mon, 27 Aug 2001 01:10:49 GMT https://community.hpe.com/t5/operating-system-hp-ux/make-recovery-743-vs-744-processor/m-p/2569481#M519869 Edward Lu 2001-08-27T01:10:49Z