topic Golden Image - Load software error in Operating System - HP-UX

Golden Image - Load software error

Andre Braganca — Thu, 04 Oct 2001 18:51:41 GMT

Cenario:
- one system administrator without Ignite experience;
- two L1000 with HP-UX 11.0;
- one is a Ignite Server (version B.2.6.358), with IP=172.16.2.17 (hostname=hxp17);
- the other (the client), with IP=172.16.2.15 (hostname=hxp15), has a 70 GB disk which I want to replace by an identical disk;
- this servers are located in the same network and only have a CDROM drive each;

I created a golden image on the Ignite server with "Add new client for recovery". Then I replaced the 70GB disk on the client and tried to recover the golden image archive into the new disk.

On the hxp15 console I executed with success "boot lan.172.16.2.17 install", getting the message stating that I could start the installation from hxp17. The network parameters show that the client got an IP from the DHCP server: 172.16.0.134

When I do a "Install Client/New Install" on the Ignite Server, the status is OK for:
- "Prepare Config.file";
- "Config.Disks";
- "Backup LVM";
But I get an error on "Load the software":
*Processing the archive source
/sbin/fs/nfs/mount -oro 172.16.2.17:/var/opt/ignite/recovery/archives/hxp15 /tmp/ign_configure/archive_nfs
Permission denied
ERROR: Cannot load recovery archive

The client only has "/" filesystem. I could "cd" to the indicated directories. But when manually executing the command got the same error. Also did this with exportfs in hxp17 set with "access=hxp15:172.16.0.134".

Thanks in advance for your help,
Andre'

Re: Golden Image - Load software error

harry d brown jr — Thu, 04 Oct 2001 19:28:16 GMT

Do you have tape drives on both of these servers, because if you do, then you should just create a "make_recovery -Aiv" on system B and load system a using that tape, manually modifying the necessary items (lan IP address, passwd, hostname, etc...)

Re: Golden Image - Load software error

Andre Braganca — Thu, 04 Oct 2001 19:33:25 GMT

The servers just have a network card and a CDROM drive.

Re: Golden Image - Load software error

Eileen Millen — Thu, 04 Oct 2001 19:42:58 GMT

After you add the client for recovery, you have to click on the client with the mouse and then select Actions then
Create Network recovery archive

You can bring up a client status window and look at the log file.

Eileen

Re: Golden Image - Load software error

Sanjay_6 — Thu, 04 Oct 2001 20:21:31 GMT

Hi Andre,

Looks to me, as if the ignite server is trying to mount the golden image as nfs on server with IP=172.16.2.17 whereas the one asigned by the DHCP server to your system is 172.16.0.134. Could this be the reason you are getting the permission denied message.

Also look at the thread below for a little help.

http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/B2355-90704/B2355-90704_top.html&con=/hpux/onlinedocs/B2355-90704/00/00/57-con.html&toc=/hpux/onlinedocs/B2355-90704/00/00/57-toc.html&searchterms=Recovering%20via%20the%20Network%20&queryid=20011004-141930

Hope this helps

thanks