https://community.hpe.com/t5/operating-system-hp-ux/cannot-boot-after-a-cold-install/m-p/2491224#M521071 Recently i change a faulty harddisk from a J200 9000 series. After installing a new harddisk, i tried to do a cold install of hp-ux 10.2. After install complete the system cannot boot. Then by doing a recovery, the system manage to boot up but using a temp kernel. Anyone able to help Thu, 08 Feb 2001 01:56:17 GMT Cheong P H 2001-02-08T01:56:17Z https://community.hpe.com/t5/operating-system-hp-ux/cannot-boot-after-a-cold-install/m-p/2491224#M521071 Recently i change a faulty harddisk from a J200 9000 series. After installing a new harddisk, i tried to do a cold install of hp-ux 10.2. After install complete the system cannot boot. Then by doing a recovery, the system manage to boot up but using a temp kernel. Anyone able to help Thu, 08 Feb 2001 01:56:17 GMT https://community.hpe.com/t5/operating-system-hp-ux/cannot-boot-after-a-cold-install/m-p/2491224#M521071 Cheong P H 2001-02-08T01:56:17Z https://community.hpe.com/t5/operating-system-hp-ux/cannot-boot-after-a-cold-install/m-p/2491225#M521072 Make sure you used the correct install media for the machine. If the necessary drivers are missing, the system will continue to have problems. Thu, 08 Feb 2001 15:09:16 GMT https://community.hpe.com/t5/operating-system-hp-ux/cannot-boot-after-a-cold-install/m-p/2491225#M521072 Cheryl Griffin 2001-02-08T15:09:16Z https://community.hpe.com/t5/operating-system-hp-ux/cannot-boot-after-a-cold-install/m-p/2491226#M521073 Make sure that root, boot and swap are within the first 2 Gigs of space on 10.20 Fri, 09 Feb 2001 20:15:31 GMT https://community.hpe.com/t5/operating-system-hp-ux/cannot-boot-after-a-cold-install/m-p/2491226#M521073 Jon Finley 2001-02-09T20:15:31Z