topic Re: HPVM guest during installation, an alert occurs LVM warning in Operating System - HP-UX

HPVM guest during installation, an alert occurs LVM warning

Swift16v — Mon, 18 Feb 2013 04:21:31 GMT

Hello, during Guest installation (HP-UX 11.31 OE), an alert occurs LVM warning

* Installing fileset "PHCO_42454.C-ENG-A-MAN,r=1.0" (1786 of 2212).
* Installing fileset "PHCO_42454.CAUX-ENG-A-MAN,r=1.0" (1787 of 2212).
* Installing fileset "PHCO_42454.CMIN-ENG-A-MAN,r=1.0" (1788 of 2212).
* Installing fileset "PHCO_42454.PAUX-ENG-A-MAN,r=1.0" (1789 of 2212).
LVM: WARNING: VG 64 0x000000: LV 8: Some I/O requests to this LV are waiting
indefinitely for an unavailable PV. These requests will be queued until
the PV becomes available (or a timeout is specified for the LV).
LVM: NOTICE: VG 64 0x000000: LV 8: All I/O requests to this LV that were
waiting indefinitely for an unavailable PV have now completed.
LVM: WARNING: VG 64 0x000000: LV 8: Some I/O requests to this LV are waiting
indefinitely for an unavailable PV. These requests will be queued until
the PV becomes available (or a timeout is specified for the LV).
LVM: NOTICE: VG 64 0x000000: LV 8: All I/O requests to this LV that were
waiting indefinitely for an unavailable PV have now completed.

-------------------------------------------------------------------------------

Version: HPVM B.06.10.05

[Virtual Machine Details]
Virtual Machine Name VM # Type OS Type State
==================== ===== ==== ======= ========
VMTEST 1 SH HPUX On (OS)

[Runnable Status Details]
Runnable status : Runnable

[Remote Console]
Remote Console not configured

[Authorized Administrators]
Oper Groups :
Admin Groups :
Oper Users :
Admin Users :

[Virtual CPU Details]
#vCPUs Ent Min Ent Max
====== ======= =======
4 50.0% 100.0%

[Memory Details]
Total Reserved Overhead
Memory Memory Memory
======= ======== ========
8 GB 64 MB 192 MB

[Dynamic Memory Information]
NOTE: Dynamic data unavailable, configured values only
Minimum Target Memory Maximum
Memory Memory Entitlement Memory
=========== =========== =========== ===========
512 MB 8192 MB - 8192 MB

[Storage Interface Details]
vPar/VM Physical
Device Adapter Bus Dev Ftn Tgt Lun Storage Device
======= ========== === === === === === ========= =========================
dvd avio_stor 0 1 0 0 0 file /ISOS/VSE-OE_11i_v3_DVD_1_BA929-10012.iso
disk avio_stor 0 1 0 1 0 lv /dev/vgVMTEST/rlvVMTEST

[Network Interface Details]
Interface Adaptor Name/Num PortNum Bus Dev Ftn Mac Address
========= ========== ===================== ======= === === === =================
vswitch avio_lan lan10.1.9 1 0 0 0 8a-d1-15-74-57-66

[Direct I/O Interface Details]
vPar/VM Physical
Device Adapter Bus Dev Ftn Mac Address Storage Device
======= ======= === === === ================= ========= ===========

[Misc Interface Details]
vPar/VM Physical
Device Adapter Bus Dev Ftn Tgt Lun Storage Device
======= ========== === === === === === ========= =========================
serial com1 tty console

hp Integrity BL860c i2 with VC Eth/FC

Storage = Netapp 3140

Thanks

Re: HPVM guest during installation, an alert occurs LVM warning

Stan_M — Mon, 18 Feb 2013 07:43:24 GMT

How is the NETAPP connected? FC or iSCSI?

Note that LVOL on iSCSI is not supported for backing store. See HPVM documentation.

Stan

Re: HPVM guest during installation, an alert occurs LVM warning

Swift16v — Mon, 18 Feb 2013 12:43:13 GMT

Hi,is connected by FC.

When install guest using local lv (Disk internal), the installation finish OK.

Thanks

Re: HPVM guest during installation, an alert occurs LVM warning

Stan_M — Mon, 18 Feb 2013 13:33:05 GMT

You may want to speak to netapp in that case.

Re: HPVM guest during installation, an alert occurs LVM warning

Swift16v — Mon, 18 Feb 2013 13:45:28 GMT

I suspect it's a problem of HPVM by:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=4146186&prodTypeId=18964&objectID=c03436478

I have others HP-UX 11.31 connected to Netapp3140 without problem.

Re: HPVM guest during installation, an alert occurs LVM warning

Stan_M — Mon, 18 Feb 2013 13:50:27 GMT

That article only generally points to performance hints and doesn't provide root cause.

You already are using AVIO.

I'd really speak to Netapp...

Re: HPVM guest during installation, an alert occurs LVM warning

Swift16v — Tue, 19 Feb 2013 15:20:18 GMT

Hi,
I solved the issue changing the following

1. Change the policy to cell locality based round robin as follows:

scsimgr set_attr -D /dev/rdisk/disk8 -a load_bal_policy=cl_round_robin;

2. And set preferred path:

scsimgr save_attr -D /dev/rdisk/disk8 -a load_bal_policy=preferred_path -a preferred_path=0/0/0/5/0/0/0.0x500a0983893b4a6b.0x4000000000000000;

Re: HPVM guest during installation, an alert occurs LVM warning

Stan_M — Tue, 19 Feb 2013 15:25:18 GMT

This suggests that the array's FW did not properly supply ALUA information