Untagged and tagged VLAN in HP-UX virtualization

Manoj1 — Sun, 02 Jan 2011 19:47:01 GMT

Hi All,

When we use Untagged and tagged VLAN ID in HP-UX virtualization ?

Thanks,
Manoj

Re: Untagged and tagged VLAN in HP-UX virtualization

SoorajCleris — Mon, 03 Jan 2011 01:51:17 GMT

Hi Manoj

To use guest-based VLANs, you must first enable the tagged VLAN IDs of the GBVs on the
vswitch port. To enable the tagged VLAN IDs, use the hpvmnet -S -i command. To
disable the VLAN IDs, use the hpvmnet -o command option.

On a vswitch port, you cannot use a VLAN ID as both an untagged VLAN ID and a tagged
VLAN ID at the same time. That is, a VLAN ID used with the hpvmnet -u command option
cannot be used with the hpvmnet -i option.

Please refer link below;
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02023903/c02023903.pdf

Regards,
Sooraj

topic Re: Untagged and tagged VLAN in HP-UX virtualization in Operating System - HP-UX

Untagged and tagged VLAN in HP-UX virtualization

Re: Untagged and tagged VLAN in HP-UX virtualization