topic "uname -i" on HPVM Guest in Operating System - HP-UX

"uname -i" on HPVM Guest

David Dilly — Fri, 05 Mar 2010 10:29:06 GMT

Hello,

On a VMGuest (11.23 VMGuest on HPVM 3.5), an application work on this VM, this application bases itself on the "Machine identification number" for the licence (uname -i).

Now, if a create a new VMGuest on a HPVM 4.1 (on an other physical server) with the system disk of the first VMGuest (11.23 VMGuest on HPVM 3.5), the "Machine identification number" (uname -i) is going to change or not ?

If the "Machine identification number" change, the application would not start on the HPVM Guest from the same boot disk.

If the "Machine identification number" change, can i change this numero manually ?

Thanks

Re: "uname -i" on HPVM Guest

Eric SAUBIGNAC — Wed, 02 May 2012 07:11:29 GMT

Bonjour David,

Try this

Get uuid from source vm on the source host with :

UUID=$(hpvmstatus -P YOURVM -M | cut -d: -f 2)

Then set uuid on the target host with :

/opt/hpvm/bin/hpvmmodify -P YOURVM -x guest_uuid=$UUID

Some more intresting things in /opt/cmcluster/toolkit/hpvm/hpvmsg_package

Eric

Re: "uname -i" on HPVM Guest

David Dilly — Fri, 05 Mar 2010 11:35:53 GMT

I think you'are right !

I will look for the file hpvmsg_package.

Thanks.