topic Re: how to configure global ip address on 11.31 in Operating System - HP-UX

how to configure global ip address on 11.31

Sakthi_12 — Thu, 02 Aug 2012 05:08:49 GMT

Hi All,

i configured ipv6 on 11.31 but its showing link private link local addres, like

lan0: flags=4800841<UP,RUNNING,MULTICAST,PRIVATE,ONLINK>
inet6 fe80::21a:4bff:fe08:7918 prefix 10

But i want to configure global ipv6 address like,

2607:f0d0:1002:11::1a

Please tell me the steps,

Thanks and regards

Sakthi.

Re: how to configure global ip address on 11.31

Johnson Punniyalingam — Thu, 02 Aug 2012 05:45:15 GMT

can pls provide below output

# netstat -in

Re: how to configure global ip address on 11.31

Sakthi_12 — Thu, 02 Aug 2012 05:47:05 GMT

Please check the output

# netstat -in
IPv4:
Name      Mtu Network         Address         Ipkts              Ierrs Opkts              Oerrs Coll
lan0      1500 10.18.92.0      10.18.92.63     63787              0     11178              0     0
lo0      32808 127.0.0.0       127.0.0.1       12090426           0     12090426           0     0

IPv6:
Name         Mtu Address/Prefix                              Ipkts               Opkts
lan0        1500 fe80::21a:4bff:fe08:dbd8/10                 6                   15
lo0        32808 ::1/128                                     730113              730113

Re: how to configure global ip address on 11.31

Johnson Punniyalingam — Thu, 02 Aug 2012 06:19:43 GMT

Are you configure you interface with dual stack ?

Re: how to configure global ip address on 11.31

Sakthi_12 — Thu, 02 Aug 2012 06:22:52 GMT

Re: how to configure global ip address on 11.31

Johnson Punniyalingam — Thu, 02 Aug 2012 06:28:38 GMT

from the netstat -in you are using lan0 also to configure the ipv6 address any reasons ?

Re: how to configure global ip address on 11.31

Johnson Punniyalingam — Thu, 02 Aug 2012 06:37:31 GMT

SMH-> Networking and Communications-> Network Interfaces Configuration-> Network Interface Cards

Chose network cards (e,g lan1)

Select -> p-View/Modify IP Attributes -> IPv6 Configuration -> Chose Manual Configuration -> Key-inIPv6 Address

Re: how to configure global ip address on 11.31

Sakthi_12 — Thu, 02 Aug 2012 08:10:29 GMT

Hi Johnson,

Thanks for ur reply.....

Regards

Sakthi.

Re: how to configure global ip address on 11.31

Johnson Punniyalingam — Thu, 02 Aug 2012 10:14:44 GMT

If you are satisfied with my suggestion. please assign points and close thread.

Thank you

Re: how to configure global ip address on 11.31

SaravananPalani — Thu, 02 Aug 2012 12:56:44 GMT

You can try this also,

ifconfig lan0:1 inet6 1234::345 up

ifconfig lan0:1 inet6 -private

But, this will work only with secondary interface.