difference between static and dynamic nsap address

njia_1 — Thu, 06 Aug 2009 03:10:40 GMT

Hi everyone

I have been trying to find the answer for this for a while but no luck any help would be appreciated.

rx2660 in our model has OTS C.12 installed and here is the otsshownsaps command result
[mms32x /]# /opt/ots/bin/otsshownsaps

---------------------------------
Current local OTS NSaps:
---------------------------------
Nsap [ Alias ] [I/F Name ] Type
---------------------------------

CONS:
CLNS:
4700320080000000010100051001017316311401 lan2 static
RFC1006:

rx2660 in our customer network, OTS C.12 installed as well and here is the otsshownsaps command result
esv30a /etc/opt/ots/conf]# /opt/ots/bin/otsshownsaps

---------------------------------
Current local OTS NSaps:
---------------------------------
Nsap [ Alias ] [I/F Name ] Type
---------------------------------

CONS:
CLNS:
4700320080000000bb300f020000000000caed01 dynamic
RFC1006:

and my question is why the hell the same command does not show the interface name on customer network and also it is dynamic, what is the difference between static and dynamic NSAP address ?

The only difference in the ots_subnet file is the subnet name and actual NSAP address

Re: difference between static and dynamic nsap address

VK2COT — Thu, 06 Aug 2009 09:20:43 GMT

Hello,

There is actually a good reason:

Dynamic NSAPs are typically used for high
availability clusters running the ServiceGuard,
which automatically shares NSAPs when a node
or its network communications fail.

Cheers,

VK2COT

Re: difference between static and dynamic nsap address

njia_1 — Wed, 05 May 2010 05:08:55 GMT

Thanks

topic Re: difference between static and dynamic nsap address in Operating System - HP-UX

difference between static and dynamic nsap address

Re: difference between static and dynamic nsap address

Re: difference between static and dynamic nsap address