topic Re: hp_apa problem in Operating System - HP-UX https://community.hpe.com/t5/operating-system-hp-ux/hp-apa-problem/m-p/4544800#M534014 Hi <BR /><BR />apart from the configuration that is in place, also need to check the hardware models of the LAN cards as going to link aggregate lan900.<BR /><BR />just like to have a look at the lanscan O/P as well as ioscan -kfnClan as well as the lanadmin -x -v 900<BR />lanadmin -x -v 901 <BR /><BR />also if possible need to check from the Switch side too<BR />regards<BR />sujit Sat, 05 Dec 2009 12:07:15 GMT sujit kumar singh 2009-12-05T12:07:15Z hp_apa problem https://community.hpe.com/t5/operating-system-hp-ux/hp-apa-problem/m-p/4544798#M534012 Hi all<BR />I installed hp-apa for my oracle RAC internal and public NICs.<BR />###############################<BR /> HP_APAPORT_INTERFACE_NAME[0]=lan1<BR /> HP_APAPORT_GROUP_CAPABILITY[0]=900<BR /> HP_APAPORT_CONFIG_MODE[0]=FEC_AUTO<BR /><BR /> HP_APAPORT_INTERFACE_NAME[1]=lan2<BR /> HP_APAPORT_GROUP_CAPABILITY[1]=901<BR /> HP_APAPORT_CONFIG_MODE[1]=FEC_AUTO<BR /><BR /> HP_APAPORT_INTERFACE_NAME[2]=lan3<BR /> HP_APAPORT_GROUP_CAPABILITY[2]=900<BR /> HP_APAPORT_CONFIG_MODE[2]=FEC_AUTO<BR /><BR /> HP_APAPORT_INTERFACE_NAME[3]=lan4<BR /> HP_APAPORT_GROUP_CAPABILITY[3]=901<BR /> HP_APAPORT_CONFIG_MODE[3]=FEC_AUTO<BR /><BR /> HP_APAPORT_INTERFACE_NAME[4]=lan6<BR /> HP_APAPORT_GROUP_CAPABILITY[4]=900<BR /> HP_APAPORT_CONFIG_MODE[4]=FEC_AUTO<BR /><BR /> HP_APAPORT_INTERFACE_NAME[5]=lan7<BR /> HP_APAPORT_GROUP_CAPABILITY[5]=901<BR /> HP_APAPORT_CONFIG_MODE[5]=FEC_AUTO<BR />##########################################<BR /> HP_APA_INTERFACE_NAME[0]=lan900<BR /> HP_APA_LOAD_BALANCE_MODE[0]=LB_MAC<BR /> HP_APA_GROUP_CAPABILITY[0]=900<BR /><BR /> HP_APA_INTERFACE_NAME[1]=lan901<BR /> HP_APA_LOAD_BALANCE_MODE[1]=LB_MAC<BR /> HP_APA_GROUP_CAPABILITY[1]=901<BR />############################################<BR />The problem is that:<BR />lan900 goes to manual mode<BR />lan 901 goes to FEC_AUTO mode<BR />###########################################<BR /> Sat, 05 Dec 2009 06:50:47 GMT https://community.hpe.com/t5/operating-system-hp-ux/hp-apa-problem/m-p/4544798#M534012 CowBoy 2009-12-05T06:50:47Z Re: hp_apa problem https://community.hpe.com/t5/operating-system-hp-ux/hp-apa-problem/m-p/4544799#M534013 <!--!*#-->You can modify HP_APAPORT_CONFIG_MODE for your specific ports, let them go to the correct mode what your want.<BR /><BR />You have better to read /etc/rc.config.d/hp_apaconf and /etc/rc.config.d/hp_apaportconf configuration files' explanation again, they already explain to you clearly. Sat, 05 Dec 2009 10:41:47 GMT https://community.hpe.com/t5/operating-system-hp-ux/hp-apa-problem/m-p/4544799#M534013 lbseraph 2009-12-05T10:41:47Z Re: hp_apa problem https://community.hpe.com/t5/operating-system-hp-ux/hp-apa-problem/m-p/4544800#M534014 Hi <BR /><BR />apart from the configuration that is in place, also need to check the hardware models of the LAN cards as going to link aggregate lan900.<BR /><BR />just like to have a look at the lanscan O/P as well as ioscan -kfnClan as well as the lanadmin -x -v 900<BR />lanadmin -x -v 901 <BR /><BR />also if possible need to check from the Switch side too<BR />regards<BR />sujit Sat, 05 Dec 2009 12:07:15 GMT https://community.hpe.com/t5/operating-system-hp-ux/hp-apa-problem/m-p/4544800#M534014 sujit kumar singh 2009-12-05T12:07:15Z Re: hp_apa problem https://community.hpe.com/t5/operating-system-hp-ux/hp-apa-problem/m-p/4544801#M534015 Assuming that the configs you posted came from the right files (hp_apaportconf for the 6 ports, hp_apaconf for the 2 aggregates), it looks correct. <BR /><BR />Can you post the outout you get when you run "/sbin/init.d/hpapa start" ?<BR /> Mon, 07 Dec 2009 14:22:01 GMT https://community.hpe.com/t5/operating-system-hp-ux/hp-apa-problem/m-p/4544801#M534015 Jim Keeble 2009-12-07T14:22:01Z