topic Re: Multi path in Operating System - HP-UX

Multi path

jafarsithik — Thu, 25 Aug 2011 17:21:56 GMT

how to check the multi path is working fine

Re: Multi path

aice — Thu, 25 Aug 2011 21:48:31 GMT

On 11iv3 you can display the lun path information for all luns with the command "scsimgr lun_map". This will give you informaiton on the total paths available to a given lun and the state of each path.

Re: Multi path

Robert_Jewell — Fri, 26 Aug 2011 15:58:57 GMT

You can also use sar to display metrics for controllers if you wish to check on load balancing:

# sar -H 2 10 (for example)

-Bob