topic Re: lv reduce from a particular disk problem in Operating System - HP-UX

lv reduce from a particular disk problem

Abhijit.A — Tue, 11 Oct 2011 07:09:05 GMT

We have one lv in the vg. We need to extend the lv by 2gb. So we added one 8gb disk in the vg. But unfortunately we extended the lv by 8gb. So right now we need get back the 6gb space. We didn't run fsadm and the F.S is online.

Need help how to reduce excess 6gb space from the lv

Re: lv reduce from a particular disk problem

James R. Ferguson — Tue, 11 Oct 2011 10:24:36 GMT

Hi:

As long as you didn't extend the filesystem you can simply 'lvreduce' to the size you desire. Since you did not extend the filesystem, the extents that 'lvreduce' will return to the free pool have nothing you need.

Regards!

...JRF...

Re: lv reduce from a particular disk problem

Abhijit.A — Tue, 11 Oct 2011 11:18:14 GMT

Previously lv size was 40gb. Now it is 48 gb. 40gb lv is mounted & working. If i want to reduce it to 42gb, is there any impact to the online F.S or we need to umount the F.S. We run lvextend, but we didn't run fsadm. So lv is extended but is not reflect on mount pt. as i was not run fsadm.

Re: lv reduce from a particular disk problem

James R. Ferguson — Tue, 11 Oct 2011 11:47:20 GMT

@Abhijit.A wrote:
Previously lv size was 40gb. Now it is 48 gb. 40gb lv is mounted & working. If i want to reduce it to 42gb, is there any impact to the online F.S or we need to umount the F.S. We run lvextend, but we didn't run fsadm. So lv is extended but is not reflect on mount pt. as i was not run fsadm.

As I said before, simply 'lvreduce'. You do not need to unmount the filesystem. The filesystem boundries are where they were before you 'lvextend'ed the logical volume.

It never hurts to have a backup before doing LVM operations.

Regards!

...JRF...

Re: lv reduce from a particular disk problem

Abhijit.A — Mon, 07 Nov 2011 05:00:46 GMT

Thanks for your reply...

could you please tell me how could i use lvreduce command in this case, means is it require any lv range to be specified....?