disk failed in vg01

rajithhcl — Thu, 24 Nov 2011 14:20:34 GMT

hpunx 11.11 in vg01 one disk is got failed ,while checking it with diskinfo not showing output.when i try to activate the vg01 as vgchange -a y vg01 it shows the error

vgchange: Warning: Couldn't attach to the volume group physical volume "/dev/dsk/c0t6d0":
Device busy
Volume group "vg01" has been successfully changed.

then i can diplay vgdisplay -v vg01 here ,it will show all lvols here with error i hav attached vgdisplay and lvmtab o/p.

now i hav to replace the failed disk and want ot activate the vg01 , can any body help me for the same.

Re: disk failed in vg01

Chhaya_Z — Mon, 28 Nov 2011 14:01:27 GMT

Hi,

You might find the below document helpful:

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01911837/c01911837.pdf

Regards,

Chhaya

topic disk failed in vg01 in Operating System - HP-UX

disk failed in vg01

Re: disk failed in vg01