topic Re: remsh Second port not reserved in Operating System - HP-UX

remsh Second port not reserved

BPerela — Tue, 14 Apr 2009 10:55:38 GMT

Hi.

With remsh from a host, i get the error "Second port not reserved" (The secondary socket connection does not use a reserved port.)

remshd(1M) says "If a secondary socket has been set up...". But how can I set up the secondary socket?

I don't understand it.
Some idea?

Re: remsh Second port not reserved

Steven E. Protter — Tue, 14 Apr 2009 13:27:57 GMT

Shalom,

The server accepting the command must have a listener set up.

remsh is an insecure protocol. You should consider ssh instead which can be modified to use ports other than 22.

SEP

Re: remsh Second port not reserved

TTr — Tue, 14 Apr 2009 16:30:41 GMT

Check the inetd.conf on the remote server to see if you are using any special options such as -R, -r, -K, -k etc.

Re: remsh Second port not reserved

BPerela — Wed, 15 Apr 2009 06:35:50 GMT

Hola hola.

Thanks for your replies.

The problem was simply the resolution of the name of the host. It was not that I expected.

I put it correctly in .rhosts and it works fine.

Also I'll try SSH.

Bye.

Re: remsh Second port not reserved

BPerela — Thu, 16 Apr 2009 09:46:04 GMT

Thanks.