topic Re: ifalias error on HP-UX 10.20 in Operating System - HP-UX

ifalias error on HP-UX 10.20

Robert D. Archard — Wed, 04 Jun 2008 14:03:26 GMT

I am assigning new IP addresses to our servers, but I use HP OmniBack II which uses a node locked license. I somehow want it to think it is still the old IP address too. I read about ifalias, but it keeps giving me errors.

Old IP: 204.x.x.2
New IP: 10.x.x.2

I want it to think it is both IP addresses so the software will work!

Re: ifalias error on HP-UX 10.20

Jeff_Traigle — Wed, 04 Jun 2008 14:40:59 GMT

It might help if you told us what the errors are. However, given the IP addresses you listed, I'm going to go out on a limb and say it's because the addresses are not on the same subnet. If my memory is correct, you cannot have IP addresses from different subnets on the same interface in HP-UX.

All of the products I've dealt with always used hostname or "uname -i" output to determine if the system was licensed. I don't remember any that used IP addresses. Granted, I've never dealt with OmniBack II licenses so maybe HP did something odd with them, but it might be worth verifying that you're even trying to do the correct thing to avoid license problems.

Re: ifalias error on HP-UX 10.20

melvyn burnard — Wed, 04 Jun 2008 14:52:11 GMT

what ifalias patch do you have?
PHNE_12492 allowed for adding of ip addresses onto a differfent subnet

Re: ifalias error on HP-UX 10.20

Robert D. Archard — Wed, 04 Jun 2008 15:08:50 GMT

I have patches PHNE_12492 and PHNE_22507 instaled.

Re: ifalias error on HP-UX 10.20

melvyn burnard — Wed, 04 Jun 2008 15:57:02 GMT

ok, so what command are you using, and what are the errors you get?

Re: ifalias error on HP-UX 10.20

Robert D. Archard — Wed, 04 Jun 2008 16:03:15 GMT

ifalias lan0 add 204.x.x.2

ifalias: ioctl (SIOCADDIFADDR): Can't assign requested address

Re: ifalias error on HP-UX 10.20

melvyn burnard — Wed, 04 Jun 2008 16:31:19 GMT

That comman d does not look right to me
I sadly have no access to 10.20 boxes, as that OS is long out of support, but I think you need to add in a subnet mask along the lines of:
ifalias lan0 addmask 255.a.b.c 204.x.x.2

where a.b.c is to match your subnet fo rthe 204 address

Re: ifalias error on HP-UX 10.20

Robert D. Archard — Wed, 04 Jun 2008 16:54:08 GMT

You da man!

That worked and I thought I tried every combination of the command. Plus, it solved y license issue. It also retained the assignment after rebooting.

FYI, supposedly, HP said they will transfer my licenses, I am waiting for a response.

Thanks,
Bob

Re: ifalias error on HP-UX 10.20

Robert D. Archard — Wed, 04 Jun 2008 16:59:05 GMT

I spoke too soon. It retained the setting after rebooting, but now it the licenses are showing expired again! A mystery.

Re: ifalias error on HP-UX 10.20

Robert D. Archard — Wed, 04 Jun 2008 17:24:41 GMT

It turns out that I had to add ifalias to the rc. I found the scripts for this online that someone wrote for 10.20.

Problem solved!