topic Need quick NFS mount instructions in Operating System - HP-UX

Need quick NFS mount instructions

Debbie Fleith — Thu, 26 Jun 2008 19:26:31 GMT

Our HP 11.0 tape drive died, so we want to backup temporarily to an nfs mount. The nfs is created on a new RH5 Linux server and is accessible from other servers on the LAN. However, when I try to mount a new remote file system (/tape) in SAM using nfs from the HP-UX 11.0 server, I get an error "The command used to mount the new file system, mount(1m), has failed to mount /tape. The stderr output from the command is shown below. Permission denied"

Anyone have any suggestions?

Re: Need quick NFS mount instructions

Tim Nelson — Thu, 26 Jun 2008 20:44:07 GMT

Permission denied means source server is not configured to allow THIS server to mount the filesystem.

hmm... RH5 ? /etc/exports ? /etc/dfs/dfstab ? Not sure.

Gotta wait for the RedHat people to show up in the HPUX forum ;) (they are here, somewhere)...

Re: Need quick NFS mount instructions

V. Nyga — Fri, 27 Jun 2008 15:03:53 GMT

... but I doubt, that the RedHat people will look inside this thread with this title ...

You should give more hints in your title and/or go to the linux forum:
http://forums11.itrc.hp.com/service/forums/familyhome.do?familyId=118

HTH
Volkmar

Re: Need quick NFS mount instructions

Dave Olker — Fri, 27 Jun 2008 15:14:23 GMT

On the RH5 server, what are the contents of the /etc/exports file?

Dave

Re: Need quick NFS mount instructions

Debbie Fleith — Mon, 30 Jun 2008 14:06:51 GMT

It is working now.