topic Re: NTP client and server both in Operating System - HP-UX

NTP client and server both

Pradeep_3 — Tue, 29 Jul 2008 10:10:43 GMT

Hi gurus,

How to configure HP-UX box as a ntp client of windows machine and ntp server to other hp-ux boxes.

Re: NTP client and server both

Ivan Krastev — Tue, 29 Jul 2008 10:15:06 GMT

See configuring NTP docs - http://docs.hp.com/en/B2355-90110/ch08.html

regards,
ivan

Re: NTP client and server both

Pete Randall — Tue, 29 Jul 2008 10:17:13 GMT

The simple/lazy way is to use SAM > Time > NTP Broadcasting and NTP Network Time Sources.

Pete

Re: NTP client and server both

Pradeep_3 — Tue, 29 Jul 2008 10:17:36 GMT

Unable to open url

Re: NTP client and server both

Sharma Sanjeev — Tue, 29 Jul 2008 11:32:53 GMT

Hi

To configure ntp

To configure xntpd:

Edit the xntpd configuration file /etc/ntp.conf. You can also use SAM to configure xntpd.

Determine how you want to configure xntpd by reading the rest of this chapter and the xntpd man page. Then add the appropriate statements in /etc/ntp.conf.

Set the environment variable XNTPD to 1 in the file /etc/rc.config.d/netdaemons. This causes xntpd to start automatically whenever the system is booted.

Set the appropriate value for your local time zone in the file /etc/TIMEZONE.

Run the xntpd startup script with the following command:

/sbin/init.d/xntpd start

Run the ntpq program with the -p switch to verify that xntpd is forming the correct relationships with other NTP hosts. (See â Querying xntpdâ .)

This is from Link only

Regards
Sanjeev