topic Re: LANADMIN LOG FILE in Operating System - HP-UX

LANADMIN LOG FILE

Arun Jain — Tue, 22 Jan 2008 07:43:50 GMT

Hi All,

Can anyone please tell me where the output of following command goes :
lanadmin -> lan -> display.

Thanks and Regards
Arun

Re: LANADMIN LOG FILE

Ramesh S — Tue, 22 Jan 2008 08:02:08 GMT

Hi Arun

Normally, lanadmin -> lan -> display is menu based and ouptut goes to "stdout".

If you would like to redirect that output to anywhere, use the following syntax:

lanadmin -g >

Thanks & Regards

Ramesh

Re: LANADMIN LOG FILE

Arun Jain — Tue, 22 Jan 2008 08:53:04 GMT

Hi Ramesh,

for that we can use hyper terminal also, but i want a method so that I dont want to type the command again and again.

Is there any script.

Thanks and regards :

Arun

Re: LANADMIN LOG FILE

Jim Keeble — Wed, 23 Jan 2008 14:19:51 GMT

Hi Arun,

I don't think I (we?) understand your question. The command Ramesh gave can be used in a script, and can redirect the output of the menu sequence you described.

$ lanadmin -g 0 >la.out
$ cat la.out

LAN INTERFACE STATUS DISPLAY
Wed, Jan 23,2008 08:45:53

PPA Number = 0
Description = lan0 HP PCI 10/100Base-TX Core [100BASE-TX,FD,
AUTO,TT=1500]
Type (value) = ethernet-csmacd(6)
MTU Size = 1500
Speed = 100000000
Station Address = 0x60b0d023e7
Administration Status (value) = up(1)
Operation Status (value) = up(1)
Last Change = 768476039
Inbound Octets = 2821295998
Inbound Unicast Packets = 1027281
Inbound Non-Unicast Packets = 31335788
Inbound Discards = 48
Inbound Errors = 0
Inbound Unknown Protocols = 104697
Outbound Octets = 234703485
Outbound Unicast Packets = 1038455
Outbound Non-Unicast Packets = 14661
Outbound Discards = 0
Outbound Errors = 0
Outbound Queue Length = 0
Specific = 655367

Ethernet-like Statistics Group

Index = 1
Alignment Errors = 0
FCS Errors = 0
Single Collision Frames = 0
Multiple Collision Frames = 0
Deferred Transmissions = 0
Late Collisions = 0
Excessive Collisions = 0
Internal MAC Transmit Errors = 0
Carrier Sense Errors = 0
Frames Too Long = 0
Internal MAC Receive Errors = 0