topic Re: Configuring all unconfigured software filesets FAIL in Operating System - HP-UX

Configuring all unconfigured software filesets FAIL

Sergej Kleva — Fri, 05 Dec 2003 03:04:08 GMT

Hi guru's!

I 've just installed QPK1100_11.00.depot on
HP-UX 11.00

And than in the proccess of booting i get following error:

Configuring all unconfigured software filesets....FAIL

Here is the output of /etc/rc.log

Configuring all unconfigured software filesets
Output from "/sbin/rc2.d/S120swconfig start":
----------------------------
* The following files, which could not be closed by swinstall when they
were updated, are being removed now:
/sbin/sh.361.removed.after.reboot

* Turning off all network based resolving services in
'/etc/nsswitch.conf'
* Starting temporary swagentd
* Configuring new filesets

======= 12/05/03 08:39:13 MET BEGIN swconfig SESSION
(non-interactive)

* Session started for user "root@claudia".

* Beginning Selection
* Target connection succeeded for "claudia:/".
* Software selections:
PHSS_24303.C-KRN,l=/,r=1.0,a=HP-UX_B.11.00_32/64,v=HP,fr=1.0,fa=HP-UX_B.11.00_32/64
* Selection succeeded.

* Beginning Analysis
* Session selections have been saved in the file
"/.sw/sessions/swconfig.last".
* "claudia:/": There will be no attempt to mount filesystems
that appear in the filesystem table.
ERROR: "claudia:/": 1 software selection(s) are corrupt.
* "claudia:/": The software dependencies for 1 products or
filesets cannot be resolved.
* The analysis phase failed for "claudia:/".
* Analysis had errors.

NOTE: More information may be found in the agent logfile (location
is claudia:/var/adm/sw/swagent.log).

======= 12/05/03 08:39:29 MET END swconfig SESSION (non-interactive)

ERROR: One or more filesets failed to configure properly Look in
/var/adm/sw/swagent.log for details. Filesets that still need to be configured can be found in /var/adm/sw/needs_config
* Terminating temporary swagentd
* Restoring '/etc/nsswitch.conf' to its original contents
"/sbin/rc2.d/S120swconfig start" FAILED

Can anyone help me?
Best regards,
Sergej

Re: Configuring all unconfigured software filesets FAIL

Robert-Jan Goossens_1 — Fri, 05 Dec 2003 03:13:56 GMT

Sergej,

Could you check /var/adm/sw/swagent.log if there are more clues or run check_paches command.

Robert-Jan

Re: Configuring all unconfigured software filesets FAIL

Sergej Kleva — Fri, 05 Dec 2003 03:17:39 GMT

Sure!

My tail -100 /var/adm/sw/swagent.log :

======= 12/05/03 08:39:18 MET BEGIN configure AGENT SESSION (pid=300)

* Agent session started for user "root@claudia". (pid=300)

* Beginning Analysis Phase.
* Target: claudia:/
* Target logfile: claudia:/var/adm/sw/swagent.log
* Reading source for file information.
NOTE: The filesystems in the filesystem table will not be checked
against those currently mounted because the
"mount_all_filesystems" option is set to "false".
ERROR: The software selection "PHSS_24303.C-KRN,l=/,r=1.0" will be
excluded because it is corrupt. Correcting a corrupt fileset
requires that you reinstall it.
NOTE: The patch fileset "PHSS_24303.C-KRN,l=/,r=1.0" may only be
installed upon a previously installed base fileset. The
specification for this base fileset is
"OS-Core.C-KRN,fr=B.11.00,v=HP". Since there is no fileset on
the target or selected from the source which matches this
specification, fileset "PHSS_24303.C-KRN,l=/,r=1.0" will be
excluded.

* Summary of Analysis Phase:
ERROR: Exclude PHSS_24303.C-KRN,l=/,r=1.0
ERROR: 1 of 1 filesets had Errors.
ERROR: The Analysis Phase had errors. See the above output for
details.

======= 12/05/03 08:39:28 MET END configure AGENT SESSION (Canceled)
(pid=300)

Re: Configuring all unconfigured software filesets FAIL

Denver Osborn — Fri, 05 Dec 2003 03:21:00 GMT

Looks like the error you posted was just pointing out that you have a corrupt fileset, and the corrupt fileset cannot be configured. Find out what fileset has the problem and remove then reinstall it.

swlist -l fileset -a state |grep -E 'corrupt|installed|transient'

-Denver

Re: Configuring all unconfigured software filesets FAIL

Sergej Kleva — Fri, 05 Dec 2003 03:24:47 GMT

I've only found this:

PHSS_24303.C-KRN corrupt

Is that mean that i have to swremove that patch and swinstall it again>?

regards,
Sergej

Re: Configuring all unconfigured software filesets FAIL

Robert-Jan Goossens_1 — Fri, 05 Dec 2003 03:28:19 GMT

Yes,

Download a fresh copy of the patch.

http://www5.itrc.hp.com/service/patch/patchDetail.do?BC=patch.breadcrumb.main|patch.breadcrumb.search|&patchid=PHSS_24303&context=hpux:800:11:00

Regards,
Robert-Jan

Re: Configuring all unconfigured software filesets FAIL

Denver Osborn — Fri, 05 Dec 2003 03:28:42 GMT

Yes, I would start by trying to swremove that patch (no reboot needed) then redownload from the ITRC and try to install the patch.

-Denver

Re: Configuring all unconfigured software filesets FAIL

Robert-Jan Goossens_1 — Fri, 05 Dec 2003 04:32:07 GMT

Sergej,

Problem resolved ?

Robert-Jan

Re: Configuring all unconfigured software filesets FAIL

Sergej Kleva — Fri, 05 Dec 2003 04:33:29 GMT

I tried to remove it but i still got an error message and cannot remove:

* Reading source for file information.
ERROR: Internal Error from SOL in function
"IA_CheckSparseDepsRemove". This could be due to a memory
allocation error.
ERROR: Cannot allocate memory. Either there is no memory available
or the memory management system is corrupted.
ERROR: Cannot continue the Analysis Phase until the previous errors
are corrected.

Re: Configuring all unconfigured software filesets FAIL

Sergej Kleva — Fri, 05 Dec 2003 04:37:15 GMT

Also when i want to reinstall:

NOTE: The patch fileset "PHSS_24303.C-KRN,r=1.0" may only be
installed upon a previously installed base fileset. The
specification for this base fileset is
"OS-Core.C-KRN,fr=B.11.00,v=HP". Since there is no fileset on
the target or selected from the source which matches this
specification, fileset "PHSS_24303.C-KRN,r=1.0" will be
excluded.
NOTE: The patch fileset "PHSS_24303.C-MIN-64ALIB,r=1.0" may only be
installed upon a previously installed base fileset. The
specification for this base fileset is
"OS-Core.C-MIN-64ALIB,fr=B.11.00,v=HP". Since there is no
fileset on the target or selected from the source which
matches this specification, fileset
"PHSS_24303.C-MIN-64ALIB,r=1.0" will be excluded.
NOTE: The patch fileset "PHSS_24303.CORE-64SLIB,r=1.0" may only be
installed upon a previously installed base fileset. The
specification for this base fileset is
"OS-Core.CORE-64SLIB,fr=B.11.00,v=HP". Since there is no
fileset on the target or selected from the source which matches this specification, fileset
"PHSS_24303.C-MIN-64ALIB,r=1.0" will be excluded.
NOTE: The patch fileset "PHSS_24303.CORE-64SLIB,r=1.0" may only be
installed upon a previously installed base fileset. The
specification for this base fileset is
"OS-Core.CORE-64SLIB,fr=B.11.00,v=HP". Since there is no
fileset on the target or selected from the source which matches this specification, fileset
"PHSS_24303.CORE-64SLIB,r=1.0" will be excluded.
NOTE: The patch fileset "PHSS_24303.PROG-AX-64ALIB,r=1.0" may only
be installed upon a previously installed base fileset. The
specification for this base fileset is
"ProgSupport.PROG-AX-64ALIB,fr=B.11.00,v=HP". Since there is
no fileset on the target or selected from the source which
matches this specification, fileset
"PHSS_24303.PROG-AX-64ALIB,r=1.0" will be excluded.
* Executing preDSA command.

* Summary of Analysis Phase:
* 14 of 14 filesets will be Skipped.
* The Analysis Phase succeeded.

Re: Configuring all unconfigured software filesets FAIL

Robert-Jan Goossens_1 — Fri, 05 Dec 2003 04:48:06 GMT

Sergej,

what comman did you use to reinstall.

# swinstall ... reinstall=true .....

Robert-Jan

Re: Configuring all unconfigured software filesets FAIL

Sergej Kleva — Fri, 05 Dec 2003 04:55:49 GMT

i was reinstalling inside GUI

#swinstall&

Then ive changed few stances in Options->Change Options:

Reinstall if same revesion
Reinstall is already there
Allow of multiple versions ...

I tryed all options but still i cant install this remain 4 packages!

Help!

Re: Configuring all unconfigured software filesets FAIL

Robert-Jan Goossens_1 — Fri, 05 Dec 2003 05:08:10 GMT

Sergej,

try the command line,

# swinstall -x reinstal=true -s

Regards,
Robert-Jan.

Re: Configuring all unconfigured software filesets FAIL

Sergej Kleva — Fri, 05 Dec 2003 05:22:31 GMT

I still got the sam NOTE:

The 4 filesets will be skipped !

NOTE: The patch fileset "PHSS_24303.C-KRN,r=1.0" may only be
installed upon a previously installed base fileset. The
specification for this base fileset is
"OS-Core.C-KRN,fr=B.11.00,v=HP". Since there is no fileset on
the target or selected from the source which matches this
specification, fileset "PHSS_24303.C-KRN,r=1.0" will be
excluded.
NOTE: The patch fileset "PHSS_24303.C-MIN-64ALIB,r=1.0" may only be
installed upon a previously installed base fileset. The
specification for this base fileset is
"OS-Core.C-MIN-64ALIB,fr=B.11.00,v=HP". Since there is no
fileset on the target or selected from the source which
matches this specification, fileset
"PHSS_24303.C-MIN-64ALIB,r=1.0" will be excluded.
NOTE: The patch fileset "PHSS_24303.CORE-64SLIB,r=1.0" may only be
installed upon a previously installed base fileset. The
specification for this base fileset is
"OS-Core.CORE-64SLIB,fr=B.11.00,v=HP". Since there is no
fileset on the target or selected from the source which
matches this specification, fileset
"PHSS_24303.CORE-64SLIB,r=1.0" will be excluded.
NOTE: The patch fileset "PHSS_24303.PROG-AX-64ALIB,r=1.0" may only
be installed upon a previously installed base fileset. The
specification for this base fileset is "ProgSupport.PROG-AX-64ALIB,fr=B.11.00,v=HP". Since there is
no fileset on the target or selected from the source which
matches this specification, fileset
"PHSS_24303.PROG-AX-64ALIB,r=1.0" will be excluded.
* Executing preDSA command.
NOTE: The used disk space on filesystem "/" is estimated to increase
by 7098 Kbytes.
This will leave 4894032 Kbytes of available user disk space
after the installation.

* Summary of Analysis Phase:
* 4 of 14 filesets will be Skipped.

Any idea>?

Re: Configuring all unconfigured software filesets FAIL

Robert-Jan Goossens_1 — Fri, 05 Dec 2003 06:34:40 GMT

Sergej,

Where did you get/download the QPK1100_11.00.depot from ?

Robert-Jan

Re: Configuring all unconfigured software filesets FAIL

Sergej Kleva — Fri, 05 Dec 2003 07:28:33 GMT

i get it from itrc hp ...

Re: Configuring all unconfigured software filesets FAIL

Robert-Jan Goossens_1 — Fri, 05 Dec 2003 07:36:07 GMT

Sergej,

the strange thing is when you look at the patch list from the QPK1100

http://www5.itrc.hp.com/service/patch/aggregatePage.do?BC=patch.breadcrumb.main|patch.breadcrumb.releaseIndexPage|patch.breadcrumb.releasePage{5012-7886}|&bundleId=QPK1100:B.11.00.62.4

the patch PHSS_24303 is not included ??????

Call HP and ask them to verify the bundle.

Hope this helps,
Robert-Jan

Re: Configuring all unconfigured software filesets FAIL

Sergej Kleva — Fri, 05 Dec 2003 08:19:42 GMT

Hi!
I've just deleted S120swinstall file in /sbin/rc2.d and than it was properly configured ...

Thnx for your patience!

regards,
Sergej

Re: Configuring all unconfigured software filesets FAIL

Sergej Kleva — Thu, 24 Aug 2006 02:26:40 GMT

Closed!