topic Re: samba in Operating System - HP-UX

samba

Goran Bulut_1 — Thu, 21 Mar 2002 05:20:45 GMT

Hi all,
Could you please any one tall me how to start with installation samba on hp 10.20.
I'm new in Unix.
I have samba on CD and I mount it what command to use to start it...
Any suggestion will be appreciated
Goran

Re: samba

Michael Tully — Thu, 21 Mar 2002 05:33:13 GMT

Hi,

If it is on the HP CD application set,
you can install it using the standard
installation program 'swinstall'

If it is not what CD is it on?

You can get an already compiled version
from the porting centre:

http://hpux.connect.org.uk/hppd/hpux/Networking/Misc/samba-2.2.3a/
whci can be installed using the same
'swinstall' program.

To mount a CD, you need to know what
device it is:

# /usr/sbin/ioscan -fnkC disk
and look for the CD device

mkdir /cdrom

# mount /dev/dsk/cxtydx /cdrom
(substitute you device where it
says cxtydx)

the run the 'swinstall' program if that is
the correct format.

Let us know how you get on.

Michael

Re: samba

Choi Eun Kyoung — Fri, 22 Mar 2002 02:37:21 GMT

# ioscan -funC disk
find the block device file for your CD-ROM
# mkdir /cdrom
create a mount point directory
# mount /dev/dsk/c1t3d0 /cdrom
mount the CD

CDFS file systems can be included in the /etc/fstab file for qutomatic mounting at boot much like any other file system

/dev/dsk/c1t3d0 /cdrom cdfs ro 0 0
local CD-ROM drive

#swinstall -s /tmp/*.depot