https://community.hpe.com/t5/operating-system-hp-ux/proactive-polling/m-p/4760889#M549038 Do you have an active/passive array? Thu, 03 Mar 2011 18:14:45 GMT Torsten. 2011-03-03T18:14:45Z https://community.hpe.com/t5/operating-system-hp-ux/proactive-polling/m-p/4760888#M549037 You can run the pvchange -p n /dev/dsk/c#t#d# command to turn proactive polling OFF after you add the disk to a volume group, but is there a way to turn it OFF prior to adding it to a volume group? We are getting trespasses on the Clarion frame until I turn it off.<BR /><BR />Thanks Thu, 03 Mar 2011 15:39:33 GMT https://community.hpe.com/t5/operating-system-hp-ux/proactive-polling/m-p/4760888#M549037 David A. deVries 2011-03-03T15:39:33Z https://community.hpe.com/t5/operating-system-hp-ux/proactive-polling/m-p/4760889#M549038 Do you have an active/passive array? Thu, 03 Mar 2011 18:14:45 GMT https://community.hpe.com/t5/operating-system-hp-ux/proactive-polling/m-p/4760889#M549038 Torsten. 2011-03-03T18:14:45Z