topic Gateway problem in Operating System - HP-UX

Gateway problem

Sauvik Basu — Mon, 20 Mar 2006 08:33:03 GMT

Whenever I nat my HP-UX box with an external IP it works fine for a few moments but then the external natting stops working.Do I need to manually edit any file for it to work?I am configuring the gateway via SAM.
Thanks in advance for you help.

Re: Gateway problem

Chan 007 — Mon, 20 Mar 2006 09:17:43 GMT

Modify using

/etc/rc.config.d/netconf

ROUTE_DESTINATION[1]="default"
ROUTE_MASK[1]=""
ROUTE_GATEWAY[1]=""
ROUTE_COUNT[1]="1"
ROUTE_ARGS[1]=""

Chan

Re: Gateway problem

Victor Fridyev — Mon, 20 Mar 2006 09:55:48 GMT

Hi,
Run ndd -set /dev/ip ip_ire_gw_probe 0
If this helps, add the following to /etc/rc.config/nddconf:

TRANSPORT_NAME[0]=ip
NDD_NAME[0]=ip_ire_gw_probe
NDD_VALUE[0]=0

HTH

Re: Gateway problem

Jim Keeble — Tue, 21 Mar 2006 07:36:58 GMT

The ndd setting above is correct. I'm not positive, but I think you may also have to delete and re-add the route after changing the ndd parameter to may it take effect. Or, make the nddconf change and reboot.

Re: Gateway problem

Arunvijai_4 — Tue, 21 Mar 2006 08:19:12 GMT

Hi Sauvik,

This could be due to incorrect gateway(s) present in /etc/rc.config.d/netconf file. You need to edit to reflect the changes.

-Arun