topic Re: Creating a logical volume in Operating System - HP-UX

Creating a logical volume

ROSS HANSON — Tue, 16 Mar 2010 16:48:55 GMT

on my 11.23 system and before, I was able to created a logical volume /tmp/sys/log. This is NOT the /tmp LV but a part of the name of the logical volume. So the whole logical volume name is /tmp/sys/log. Can this be done in the SIM on a system running 11.31? Because I have been unsuccessful at doing this

Re: Creating a logical volume

Michael Steele_2 — Tue, 16 Mar 2010 16:58:27 GMT

Hi

Could you paste in the error message please?

Re: Creating a logical volume

James R. Ferguson — Tue, 16 Mar 2010 17:00:27 GMT

Hi Ross:

Why would you *want* to do this? Normally, of course, device files for LVM are created in the '/dev' directory which is merely a subdirectory of the 'root' directory and therefore mounted first and/or in single-user mode. The device file you created would require the '/tmp' directory to be mounted --- not a very good thing.

Regards!

...JRF...

Re: Creating a logical volume

Torsten. — Tue, 16 Mar 2010 17:22:47 GMT

I think this is the mount point (/tmp/sys/log), isn't it?

Re: Creating a logical volume

ROSS HANSON — Tue, 16 Mar 2010 19:16:52 GMT

I do not have any error messages because when I hit "enter" the web interface just goes back to the page where I enter the information. After much trial and tribulations I have gotten it to work.

Yes, I was entering the mount point instead of the logical volume name.

The reason we need to call this certain mount point is only due to our vendor on the software we are running. So, it is required.