topic Re: Break the mirror before OS patching in Operating System - HP-UX

Break the mirror before OS patching

Santhosh.c — Mon, 22 Mar 2010 11:54:53 GMT

Hi Guru's
I am looking for the procedure/commands for

1)breaking mirror (vxvm) before OS patching so that we can boot the system from 2nd disk if the patching fail.
2)how to rejoin the disk in mirror after successfull patching.

Please find the detail of rootdg available on my system for your reference.
Thanks in advance.
Santhosh
---------------------------------------
# vxprint -g rootdg
TY NAME ASSOC KSTATE LENGTH PLOFFS STATE TUTIL0 PUTIL0
dg rootdg rootdg - - - - - -

dm rootdisk01 c2t0d0 - 71679336 - - - -
dm rootdisk02 c2t1d0 - 71681248 - - - -

v homevol fsgen ENABLED 2097152 - ACTIVE - -
pl homevol-01 homevol ENABLED 2097152 - ACTIVE - -
sd rootdisk01-04 homevol-01 ENABLED 2097152 0 - - -
pl homevol-02 homevol ENABLED 2097152 - ACTIVE - -
sd rootdisk02-04 homevol-02 ENABLED 2097152 0 - - -

v optvol fsgen ENABLED 4194304 - ACTIVE - -
pl optvol-01 optvol ENABLED 4194304 - ACTIVE - -
sd rootdisk01-05 optvol-01 ENABLED 4194304 0 - - -
pl optvol-02 optvol ENABLED 4194304 - ACTIVE - -
sd rootdisk02-05 optvol-02 ENABLED 4194304 0 - - -

v repositoryvol fsgen ENABLED 2097152 - ACTIVE - -
pl repositoryvol-01 repositoryvol ENABLED 2097152 - ACTIVE - -
sd rootdisk01-06 repositoryvol-01 ENABLED 2097152 0 - - -

v rootvol root ENABLED 2097152 - ACTIVE - -
pl rootvol-01 rootvol ENABLED 2097152 - ACTIVE - -
sd rootdisk01-03 rootvol-01 ENABLED 2097152 0 - - -
pl rootvol-02 rootvol ENABLED 2097152 - ACTIVE - -
sd rootdisk02-03 rootvol-02 ENABLED 2097152 0 - - -

v standvol fsgen ENABLED 1048320 - ACTIVE - -
pl standvol-01 standvol ENABLED 1048320 - ACTIVE - -
sd rootdisk01-01 standvol-01 ENABLED 1048320 0 - - -
pl standvol-02 standvol ENABLED 1048320 - ACTIVE - -
sd rootdisk02-01 standvol-02 ENABLED 1048320 0 - - -

v swapvol swap ENABLED 8388608 - ACTIVE - -
pl swapvol-01 swapvol ENABLED 8388608 - ACTIVE - -
sd rootdisk01-02 swapvol-01 ENABLED 8388608 0 - - -
pl swapvol-02 swapvol ENABLED 8388608 - ACTIVE - -
sd rootdisk02-02 swapvol-02 ENABLED 8388608 0 - - -

v tivvol fsgen ENABLED 300000 - ACTIVE - -
pl tivvol-01 tivvol ENABLED 300000 - ACTIVE - -
sd rootdisk01-07 tivvol-01 ENABLED 300000 0 - - -

v tmpvol fsgen ENABLED 2097152 - ACTIVE - -
pl tmpvol-01 tmpvol ENABLED 2097152 - ACTIVE - -
sd rootdisk01-08 tmpvol-01 ENABLED 2097152 0 - - -
pl tmpvol-02 tmpvol ENABLED 2097152 - ACTIVE - -
sd rootdisk02-06 tmpvol-02 ENABLED 2097152 0 - - -

v toolsvol fsgen ENABLED 1327104 - ACTIVE - -
pl toolsvol-01 toolsvol ENABLED 1327104 - ACTIVE - -
sd rootdisk01-09 toolsvol-01 ENABLED 507904 0 - - -
sd rootdisk01-12 toolsvol-01 ENABLED 819200 507904 - - -

v usrvol fsgen ENABLED 3145728 - ACTIVE - -
pl usrvol-01 usrvol ENABLED 3145728 - ACTIVE - -
sd rootdisk01-10 usrvol-01 ENABLED 3145728 0 - - -
pl usrvol-02 usrvol ENABLED 3145728 - ACTIVE - -
sd rootdisk02-07 usrvol-02 ENABLED 3145728 0 - - -

v varvol fsgen ENABLED 16777216 - ACTIVE - -
pl varvol-01 varvol ENABLED 16777216 - ACTIVE - -
sd rootdisk01-11 varvol-01 ENABLED 16777216 0 - - -
pl varvol-02 varvol ENABLED 16777216 - ACTIVE - -
sd rootdisk02-08 varvol-02 ENABLED 16777216 0 - - -

Re: Break the mirror before OS patching

Ron Irving — Mon, 22 Mar 2010 14:27:45 GMT

Greetings!!

Well, you'll have to lvreduce all the logical volumes, and vgreduce all volume groups. It's somewhat tedious and time-consuming.

Do you have ignite installed? Maybe a make_tape_recovery, or a make_net_recovery?'

Just my 34 cents worth.

Re: Break the mirror before OS patching

John Guster — Mon, 22 Mar 2010 15:57:33 GMT

what is the OS version?

Re: Break the mirror before OS patching

Santhosh.c — Mon, 22 Mar 2010 16:02:09 GMT

# uname -a
HP-UX B.11.11 U 9000/800 2328359709 unlimited-user license

Re: Break the mirror before OS patching

Kapil Jha — Tue, 23 Mar 2010 00:20:11 GMT

You will have to dissociate the plex and after patching attach it.
eg before patching

#volplex -g rootdg -v homevol dis homevol-02
this would dissociate plex homevol-02 from volume homevol

do the same for all the volumes.

After patching
#vxplex -g rootdg -v homevol att homevol-02

this should automatically start the syncing.

If you have ignite then I suppose you can directly go and install patches in case of trouble you can re-ignite the servers its pretty easy.

BR,
Kapil+

Re: Break the mirror before OS patching

Chandrahasa s — Tue, 23 Mar 2010 02:13:51 GMT

Hi,

I hope its no need to break mirror,you can down the server remove the secondary disk and reboot using primary disk and apply patch.

After conforming patches are working fine you can simply insert secondary disk and it will start to sync.

Re: Break the mirror before OS patching

Torsten. — Tue, 23 Mar 2010 04:48:39 GMT

The problem is, when "splitting" the mirror that way, if the OS loader is patched during the session, this software will remain unchanged (not patched) on the inactive disk.
This may cause problems.
Better to keep an ignite backup and patch both disks.

Re: Break the mirror before OS patching

Kapil Jha — Tue, 23 Mar 2010 04:59:40 GMT

Yups I almost always forget bootconf file :)

Here is a good writeup on bootconf
http://forums11.itrc.hp.com/service/forums/questionanswer.do?admit=109447626+1269323871411+28353475&threadId=1310636

BR,
Kapil+

Re: Break the mirror before OS patching

chris huys_4 — Thu, 25 Mar 2010 23:43:09 GMT

Hi Santosh,

A lot of non-os volumes, repositoryvol;tivvol;toolsvol, which shouldnt be there anyway, are not mirrored to the mirrorbootdisk, so not so sure if a working mirrorbootdisk, after the primary bootdisk has failed, after patching, is that interesting.

For the rest, the following example, will show the correct syntax to split a vxvm mirrorbootdisk, before applying the patches.

>>>>
1. detach the mirrorplexes of the rootdg diskgroup. (if rootdg is mirrored)

gsesrv8 # vxdisk -g rootdg list
DEVICE TYPE DISK GROUP STATUS
c1t15d0 simple rootdisk01 rootdg online
c3t15d0 simple rootdisk02 rootdg online

gsesrv8 # vxprint -g rootdg -htr
v standvol - ENABLED ACTIVE 307200 ROUND - fsgen

pl standvol-01 standvol ENABLED ACTIVE 307200 CONCAT - RW
sd rootdisk01-01 standvol-01 rootdisk01 0 307200 0 c1t15d0 ENA
pl standvol-02 standvol ENABLED ACTIVE 307200 CONCAT - RW
sd rootdisk02-01 standvol-02 rootdisk02 0 307200 0 c3t15d0 ENA

>> CONCLUSION -- The plexes ending on -02, i.e. standvol-02, are part of the "mirror" disk, rootdisk02 and will be detached.

gsesrv8 # vxprint -g rootdg -p
TY NAME ASSOC KSTATE LENGTH PLOFFS STATE TUTIL0 PUTIL0
pl homevol-01 homevol ENABLED 20480 - ACTIVE - -
pl homevol-02 homevol ENABLED 20480 - ACTIVE - -
pl optvol-01 optvol ENABLED 1677083 - ACTIVE - -
pl optvol-02 optvol ENABLED 1677083 - ACTIVE - -
pl rootvol-01 rootvol ENABLED 204800 - ACTIVE - -
pl rootvol-02 rootvol ENABLED 204800 - ACTIVE - -
pl standvol-01 standvol ENABLED 307200 - ACTIVE - -
pl standvol-02 standvol ENABLED 307200 - ACTIVE - -
pl swapvol-01 swapvol ENABLED 4194304 - ACTIVE - -
pl swapvol-02 swapvol ENABLED 4194304 - ACTIVE - -
pl tmpvol-01 tmpvol ENABLED 204800 - ACTIVE - -
pl tmpvol-02 tmpvol ENABLED 204800 - ACTIVE - -
pl usrvol-01 usrvol ENABLED 2302940 - ACTIVE - -
pl usrvol-02 usrvol ENABLED 2302940 - ACTIVE - -
pl varvol-01 varvol ENABLED 4706304 - ACTIVE - -
pl varvol-02 varvol ENABLED 4706304 - ACTIVE - -

#vxplex -g rootdg dis standvol-02
#vxplex -g rootdg dis swapvol-02
#vxplex -g rootdg dis rootvol-02
#vxplex -g rootdg dis tmpvol-02
#vxplex -g rootdg dis homevol-02
#vxplex -g rootdg dis optvol-02
#vxplex -g rootdg dis usrvol-02
#vxplex -g rootdg dis varvol-02

gsesrv8 # vxprint -g rootdg -p
TY NAME ASSOC KSTATE LENGTH PLOFFS STATE TUTIL0 PUTIL0
pl homevol-01 homevol ENABLED 20480 - ACTIVE - -
pl homevol-02 - DISABLED 20480 - IOFAIL - -
pl optvol-01 optvol ENABLED 1677083 - ACTIVE - -
pl optvol-02 - DISABLED 1677083 - IOFAIL - -
pl rootvol-01 rootvol ENABLED 204800 - ACTIVE - -
pl rootvol-02 - DISABLED 204800 - IOFAIL - -
pl standvol-01 standvol ENABLED 307200 - ACTIVE - -
pl standvol-02 - DISABLED 307200 - - - -
pl swapvol-01 swapvol ENABLED 4194304 - ACTIVE - -
pl swapvol-02 - DISABLED 4194304 - - - -
pl tmpvol-01 tmpvol ENABLED 204800 - ACTIVE - -
pl tmpvol-02 - DISABLED 204800 - IOFAIL - -
pl usrvol-01 usrvol ENABLED 2302940 - ACTIVE - -
pl usrvol-02 - DISABLED 2302940 - IOFAIL - -
pl varvol-01 varvol ENABLED 4706304 - ACTIVE - -
pl varvol-02 - DISABLED 4706304 - IOFAIL - -
>>>>>>>>

For attaching the plexes afterwards.

>>>>>
13. reattach the mirror rootdisk

gsesrv8 # vxprint -g rootdg -p
TY NAME ASSOC KSTATE LENGTH PLOFFS STATE TUTIL0 PUTIL0
pl homevol-01 homevol ENABLED 20480 - ACTIVE - -
pl homevol-02 - DISABLED 20480 - IOFAIL - -
pl optvol-01 optvol ENABLED 1677083 - ACTIVE - -
pl optvol-02 - DISABLED 1677083 - IOFAIL - -
pl rootvol-01 rootvol ENABLED 204800 - ACTIVE - -
pl rootvol-02 - DISABLED 204800 - IOFAIL - -
pl standvol-01 standvol ENABLED 307200 - ACTIVE - -
pl standvol-02 - DISABLED 307200 - - - -
pl swapvol-01 swapvol ENABLED 4194304 - ACTIVE - -
pl swapvol-02 - DISABLED 4194304 - - - -
pl tmpvol-01 tmpvol ENABLED 204800 - ACTIVE - -
pl tmpvol-02 - DISABLED 204800 - IOFAIL - -
pl usrvol-01 usrvol ENABLED 2302940 - ACTIVE - -
pl usrvol-02 - DISABLED 2302940 - IOFAIL - -
pl varvol-01 varvol ENABLED 4706304 - ACTIVE - -
pl varvol-02 - DISABLED 4706304 - IOFAIL - -

#vxplex -g rootdg att standvol standvol-02
#vxplex -g rootdg att swapvol swapvol-02
#vxplex -g rootdg att rootvol rootvol-02
#vxplex -g rootdg att tmpvol tmpvol-02
#vxplex -g rootdg att homevol homevol-02
#vxplex -g rootdg att optvol optvol-02
#vxplex -g rootdg att usrvol usrvol-02
#vxplex -g rootdg att varvol varvol-02
>>>>>

However, if you are not experienced with vxvm, I would just rely on Ignite/Ux, for when the patching fails.

Greetz,
Chris