https://community.hpe.com/t5/operating-system-hp-ux/make-recovery/m-p/2436993#M5534 Yes ignite-ux runs on the v-class the limitation is that... "Firmware version 4.3 or higher is required to enable tape boot support for the V-Class. Contact<BR />your local HP Representative for information about latest firmware<BR />upgrades. " excerpt from <BR /><A href="http://www.software.hp.com/products/IUX/docs/release_note_B.2.5.html" target="_blank">http://www.software.hp.com/products/IUX/docs/release_note_B.2.5.html</A><BR /><BR />good luck Wed, 16 Aug 2000 15:10:47 GMT Kofi ARTHIABAH 2000-08-16T15:10:47Z https://community.hpe.com/t5/operating-system-hp-ux/make-recovery/m-p/2436992#M5533 Anyone know for sure whether make_recovery is supported on V class servers? I've heard from various sources that it is not.<BR /><BR />I'd hate to find out the hard way if it doesn't work!<BR /><BR />Thanks,<BR />Tom Wed, 16 Aug 2000 15:04:11 GMT https://community.hpe.com/t5/operating-system-hp-ux/make-recovery/m-p/2436992#M5533 Tom Danzig 2000-08-16T15:04:11Z https://community.hpe.com/t5/operating-system-hp-ux/make-recovery/m-p/2436993#M5534 Yes ignite-ux runs on the v-class the limitation is that... "Firmware version 4.3 or higher is required to enable tape boot support for the V-Class. Contact<BR />your local HP Representative for information about latest firmware<BR />upgrades. " excerpt from <BR /><A href="http://www.software.hp.com/products/IUX/docs/release_note_B.2.5.html" target="_blank">http://www.software.hp.com/products/IUX/docs/release_note_B.2.5.html</A><BR /><BR />good luck Wed, 16 Aug 2000 15:10:47 GMT https://community.hpe.com/t5/operating-system-hp-ux/make-recovery/m-p/2436993#M5534 Kofi ARTHIABAH 2000-08-16T15:10:47Z https://community.hpe.com/t5/operating-system-hp-ux/make-recovery/m-p/2436994#M5535 Thanks Kofi. I'll check out firmware revision. Wed, 16 Aug 2000 15:14:32 GMT https://community.hpe.com/t5/operating-system-hp-ux/make-recovery/m-p/2436994#M5535 Tom Danzig 2000-08-16T15:14:32Z