topic printer queue migration in Operating System - HP-UX

printer queue migration

Bolek Mynarski — Tue, 26 Mar 2002 13:56:21 GMT

We are in the process of migrating from 10.20 to 11.00 of HP-UX. On our "old" system, we had about 200 printer queues. Obviously, I really do not want to re-enter all the printers manuall via jetadmin.

I was reading man pages on lp and so far, I concluded that if I copied the following directories:

/etc/lp
/usr/lib/lp
/var/adm/lp
/var/spool/lp

directories, I should be pretty much OK. However, the only thing that worries me is the version of jetadmin used for prtiner interface on 10.20 versus 11.00.

Could somebody give me some tips before I get myself into 'hot water'?

Thanks.

Re: printer queue migration

Krishna Prasad — Tue, 26 Mar 2002 14:03:29 GMT

In SAM under printers there is an option to save your lp or spooler configuration. You save that file. Either to tape or move it to a different box. Install your new OS. Then move this file back and in SAM under printers there is a restore option.

The file should be /var/sam/lp/lpinfo

Re: printer queue migration

Steve Steel — Tue, 26 Mar 2002 14:21:32 GMT

Hi

/opt/hpnp/bin/transferqueue

Has man page

transferqueue(1) transferqueue(1)

NAME
transferqueue allows users to transfer all Unix JetAdmin/JetDirect
Printer Installer Utility created queues from one Unix host to another
in the JetDirect Printer Installer Utility environment.

Steve Steel

Re: printer queue migration

Helen French — Tue, 26 Mar 2002 14:40:50 GMT

Hi,

The best choice would be storing your Printer configuration throuh SAM.

SAM -> Printers and Plotters -> LP spooler -> Save/Restore spooler configuration.

Directly copying the /etc/lp files to the new system is not a good idea, you can refer those files if needed.

HTH,
Shiju

Re: printer queue migration

Ross Martin — Tue, 26 Mar 2002 16:08:21 GMT

There is no supported way to transfer printer definitions from one HP9000 to
another. However, the following procedure can be used as a workaround. If the
procedure does not work, the printers will have to be added using the normal
methods.

1 - On the machine that has the printers you want to duplicate(system A), do
the following:
a) Go into SAM 'Printers and Plotters' area
b) Go to 'Save/Restore Spooler Configuration'
c) Go to 'Actions'
d) Click on 'Save Spooler Configuration'
e) Exit out of SAM
f) cd /var/sam/lp
g) tar cvf sam.tar *
h) transfer the sam.tar file to the system on which you want to
duplicate the printers(system B)

2 - On System B, do the following:
a) If the spooler state has not been saved before, the /var/sam/lp
directory will need to be created:
mkdir /var/sam/lp
b) Move the sam.tar file to /var/sam/lp
mv sam.tar /var/sam/lp/sam.tar
c) cd /var/sam/lp
d) tar xvf sam.tar
e) Go into SAM 'Printers and Plotters' area
f) Go to 'Save/Restore Spooler Configuration'
g) Go to 'Actions'
h) Click on 'Restore Spooler Configuration'

If all goes well, the printer configuration should be the same on System B as
it was on System A. If not, then all the printers will have to be readded
manually.

More information is available in the HP-UX System Administration Tasks manual.
"man manuals" will give you ordering information and part numbers.

Most HP documentation is avaialable online at:
http://www.docs.hp.com

Hope that helps.

Ross Martin
HP Response Center