topic Re: add file system in Operating System - HP-UX

add file system

add file system to a cl — Thu, 05 Nov 2009 14:47:32 GMT

Hi All.

please can we help me I want to add a file sytem for a cluster contain two nodes.

can we give me the full procedure.

thx again.

Re: add file system

add file system to a cl — Tue, 10 Nov 2009 07:39:44 GMT

Dear All,

please any reply.

Regards

Re: add file system

Kapil Jha — Tue, 10 Nov 2009 07:49:47 GMT

just a lil question there were a cuple of good thread, have u search the forum.

http://forums13.itrc.hp.com/service/forums/questionanswer.do?threadId=149722&admit=109447627+1257839282174+28353475

BR,
Kapil+

Re: add file system

R.K. # — Tue, 10 Nov 2009 07:51:25 GMT

Hi..

Have a look on the following link.

http://deepees.wordpress.com/2009/02/18/hp-ux-adding-a-disk-to-an-mc-serviceguard-cluster-volumegroup/

Regds..

Re: add file system

Kapil Jha — Tue, 10 Nov 2009 07:51:53 GMT

If you already have a VG and just need to add a file system, procedure would differ a lil.....

step 6-10 would be applicable.

BR,
Kapil+

Re: add file system

vjta — Tue, 10 Nov 2009 09:44:56 GMT

hi
assuming u r having vgs & lvs with appropriate FS on both nodes .
Steps are :
1. Enter VG name in cluster config file.
Enrteis Should look like this

VOLUME_GROUP /dev/vg_name
Save this file & check this cluster configuration by cmcheckconf.
O/p of this cmcheckconf should be as follows

cmcheckconf: Verification completed with no errors found.

Once it is ended with no errors as per message

Apply this configuration by cmapplyconf.
It will ask for modification confirmation

Modify the cluster configuration ([y]/n)?
Press Y >>>>>>>>>> at this point so as to save modification.

now in package control script put entries of VG & also for entries for FS_Type.

Save this file .checkconfiguration for package & apply this config once its come out without error.

regards
vjta

Re: add file system

add file system to a cl — Thu, 12 Nov 2009 11:04:16 GMT

thx u very much for your help