https://community.hpe.com/t5/operating-system-hp-ux/problem-with-missing-netapp-disks/m-p/4362963#M560347 Hi<BR /><BR />I have a server that is going to swicth from XP to Netapp. The other day Netapp was set up correct to communicate with the server. A volume was created, and an igroup as well. As a final pratcie that day I user snapdrive to create a LUN and corresponding vg and lv, and mount it on the server. All went fine. The next day I prepared a script with snapdrive-commands to create the rest of the LUNs and so on. Lo and behold, the script failed, and all Netapp disk were gone! I know there is no hardware issuses, because the old XP-disks are still available. I can't see any problems with Netapp either, LUNs are created and mapped to the server, but when it comes to discovering the new LUNs, it fails. Any ideas? <BR /><BR />---output from the command---<BR />snapdrive storage create -fs /newmount/u01 -mntopts delaylog,nodatainlog,largefiles,rw,suid -lvol vgnetapp_01/lvol1 -lun stona05:/vol/stodb06_v01/luns/u01 -lunsize 25g -igroup stodb06<BR /><BR /> LUN stona05:/vol/stodb06_v01/luns/u01 ... created<BR /><BR /> mapping new lun(s) ... done<BR /> discovering new lun(s) ... *failed*<BR /><BR /> Cleaning up ...<BR /> - LUN stona05:/vol/stodb06_v01/luns/u01 ... failed<BR /> Cleanup has failed.<BR /> Please delete LUN<BR /> stona05:/vol/stodb06_v01/luns/u01<BR />0001-267 Command error: Could not find SCSI devices<BR /><BR />---end output---<BR />BR,<BR />Kennneth Fri, 20 Feb 2009 09:20:05 GMT kgraff 2009-02-20T09:20:05Z https://community.hpe.com/t5/operating-system-hp-ux/problem-with-missing-netapp-disks/m-p/4362963#M560347 Hi<BR /><BR />I have a server that is going to swicth from XP to Netapp. The other day Netapp was set up correct to communicate with the server. A volume was created, and an igroup as well. As a final pratcie that day I user snapdrive to create a LUN and corresponding vg and lv, and mount it on the server. All went fine. The next day I prepared a script with snapdrive-commands to create the rest of the LUNs and so on. Lo and behold, the script failed, and all Netapp disk were gone! I know there is no hardware issuses, because the old XP-disks are still available. I can't see any problems with Netapp either, LUNs are created and mapped to the server, but when it comes to discovering the new LUNs, it fails. Any ideas? <BR /><BR />---output from the command---<BR />snapdrive storage create -fs /newmount/u01 -mntopts delaylog,nodatainlog,largefiles,rw,suid -lvol vgnetapp_01/lvol1 -lun stona05:/vol/stodb06_v01/luns/u01 -lunsize 25g -igroup stodb06<BR /><BR /> LUN stona05:/vol/stodb06_v01/luns/u01 ... created<BR /><BR /> mapping new lun(s) ... done<BR /> discovering new lun(s) ... *failed*<BR /><BR /> Cleaning up ...<BR /> - LUN stona05:/vol/stodb06_v01/luns/u01 ... failed<BR /> Cleanup has failed.<BR /> Please delete LUN<BR /> stona05:/vol/stodb06_v01/luns/u01<BR />0001-267 Command error: Could not find SCSI devices<BR /><BR />---end output---<BR />BR,<BR />Kennneth Fri, 20 Feb 2009 09:20:05 GMT https://community.hpe.com/t5/operating-system-hp-ux/problem-with-missing-netapp-disks/m-p/4362963#M560347 kgraff 2009-02-20T09:20:05Z