kernel error use sam

meng_1 — Wed, 03 Apr 2002 04:47:12 GMT

Hi all,
I want change my kernal configuration with SAM. But when I enter the kernel item in sam, the errror comes out as below:

Internal error: The kernel discovery tool used by SAM failed.
kernel changes cannot be made by SAM. The standard error output of
the command is shown below:

getkinfo: Syntax error in system file.
Incorrect driver/subsystem statement(s):hpstreams,clone,strlog,
sad,echo,ffs

Each driver/subsystem shown above is not valid for one of the
following reasons: the driver (including any aliases) is not
recognized; there is no support for this driver in the kernel
libraries; the driver is not supported; one or more dependency
drivers ofr this driver are missing, not supported, or not included
in the kernel libraries.

Be sure all kernel libraries from HP-UX product filesets are
installed, and that the driver/subsystem names shown above are valid.
Refer to the SAM logifle for more information.

getkinfo: Unable to read the kernel file "/stand/vmunix".
~

please give me a help thanks!

Re: kernel error use sam

Tom Geudens — Wed, 03 Apr 2002 04:49:47 GMT

Hi,
The following thread seems to cover the same problem :
http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0xb902a24d9abcd4118fef0090279cd0f9,00.html

Hope this helps,
Tom Geudens

topic Re: kernel error use sam in Operating System - HP-UX

kernel error use sam

Re: kernel error use sam