topic Re: problem while do make_recovery in Operating System - HP-UX

problem while do make_recovery

haiyu Huang — Wed, 03 Apr 2002 13:19:02 GMT

Hi I met a problem which is described as belowing:
Here is a K200 server which OS is 10.01, I installed HP Installation utility and want to us make_recovery to do a system backup on tape.
but while I executed the command" make_recovery -Av", an error occured as "sh:make_recovery : execute permission denied"and quited.
Pls tell me why and how I do make_recovery to backup system. thanks a lot.

Re: problem while do make_recovery

Francois Bariselle_3 — Wed, 03 Apr 2002 13:20:57 GMT

Hi,

Try to execute this command as root!

Frank

Re: problem while do make_recovery

Francois Bariselle_3 — Wed, 03 Apr 2002 13:30:50 GMT

Check if on our ignite server and client the tftp service is enabled.

Frank

Re: problem while do make_recovery

Francois Bariselle_3 — Wed, 03 Apr 2002 13:35:00 GMT

check this log file:

/var/opt/ignite/logs/makrec.log1.

Frank

Re: problem while do make_recovery

haiyu Huang — Thu, 04 Apr 2002 07:39:40 GMT

Hi all:

I checked system according to your suggestions:

1. I really did logged on as root.
2. tftp is enable
3. no logs under the directory of /var/opt/ignite/logs

any other clues for me? figuring it out is really important for me.
the version of HP-UX installation utilitiy is
B.2.5.136, the OS is 10.01

thanks

Re: problem while do make_recovery

Tom Geudens — Thu, 04 Apr 2002 07:50:08 GMT

Hi,
Just to make sure :
1. You installed Ignite
2. You executed the following (example from one of my servers) :
root/sv00220#cd /opt/ignite/bin
root/sv00220#./make_recovery -A -v -d /dev/rmt/0m

And that's when the problem occurs ... right ?
Regards,
Tom Geudens

Re: problem while do make_recovery

melvyn burnard — Thu, 04 Apr 2002 08:02:40 GMT

According to the numbering scheme in the Ignite/UX Release Notes at:
http://www.software.hp.com/products/IUX/docs/release_note_A.3.4.html

QUOTE:

1.1 Release Numbering Scheme
=============================

The B.* releases of Ignite-UX are based on the 11.11 version of HP-UX.
The A.* releases are based on 10.20. The Ignite-UX code base is the same
for the two releases so the features will be similar. The big difference
is that the B.* releases are capable of installing the 11.11, 11.00, and
10.20 releases of HP-UX, where as A.* Ignite-UX can install 10.20, 10.10,
and 10.01.

The format is:
{A|B}.major-rev.minor-rev.ticker

{A|B} => A: supports HP-UX 10.x Ignite-UX servers
installing HP-UX 10.x targets
=> B: supports HP-UX 11.00 & 11.11 Ignite-UX servers
installing HP-UX 11.00, 11.11 and 10.20 targets

major-rev => Major software release number, rarely changes
except when a major change occurs (like network
system recovery!).

minor-rev => Changes at each release.

ticker => Changes each time we rebuild the product and
is reset each time minor-rev changes.
May also change when a very minor change
to the product is made to fix an isolated
defect or add new hardware support.

NOTE: Prior to the B.3.0 Ignite-UX release, the B.* releases were
based on an 11.00 version of HP-UX.

END QUOTE

so your B version will not install a 10.01 system, you need to get the A.xxxxxversion

Re: problem while do make_recovery

Clemens van Everdingen — Thu, 04 Apr 2002 09:40:23 GMT

Hi,

Here is the link for the latest ignite version to download the correct software.

http://www.software.hp.com/products/IUX/download.html

C.

Re: problem while do make_recovery

haiyu Huang — Fri, 05 Apr 2002 02:51:49 GMT

For Tom: The time you mentioned is right.
thanks for your continuing support.

For melvyn burnard:
The version of application disk I used is 11.00, but 3 versions of Installation Utility are listed on this disk: 10.01, 10.20, 11.00.
I installed 10.01, so what you mean is that I used wrong application disk? if yes, why does app disk with the version of 11.00 include Inst Utility of 10.01?

Pls explain and help me.

Thanks a lot.

Re: problem while do make_recovery

Patrick Wallek — Fri, 05 Apr 2002 04:01:08 GMT

The version you installed from the 11.00 application CD will run only on an 11.0 machine, BUT it allows you to use that machine as an Ignite/UX server, via make_net_recovery, to back up and install 10.X machines as well.

What you need to do is go to:
http://software.hp.com/products/IUX/download.html#down10

and download the Ignite/UX version that is for HP-UX 10.01.

Install this and I think you will be set.

Be sure to swremove the version you already have installed before you install the correct version.