https://community.hpe.com/t5/operating-system-hp-ux/snaplus2-lu62-bind-security/m-p/3325734#M568009 I'm trying to connect to SNAplus2 from a VTAM LU62 application that currently works mainframe CICS region.<BR /><BR />When the VTAM LU62 application sends BIND to CICS, the BIND response at byte x'17' is x'00' and an FMH5 follows with no password.<BR /><BR />When the VTAM LU62 application send bind to SNAplus2, the BIND response at byte x'17' is x'12' if the partner_lu definition has conv_security_ver=YES.<BR /><BR />When the VTAM LU62 application send bind to SNAplus2, the BIND response at byte x'17' is x'10' if the partner_lu definition has conv_security_ver=NO.<BR /><BR />In both cases, VTAM application then sends an unwanted password in the FMH5, and the session fails with x'080F6051' sense code.<BR /><BR />Any ideas on how to get SNAplus2 to not set security bits in bind response? Wed, 07 Jul 2004 15:38:42 GMT Kevin O'Connell_1 2004-07-07T15:38:42Z https://community.hpe.com/t5/operating-system-hp-ux/snaplus2-lu62-bind-security/m-p/3325734#M568009 I'm trying to connect to SNAplus2 from a VTAM LU62 application that currently works mainframe CICS region.<BR /><BR />When the VTAM LU62 application sends BIND to CICS, the BIND response at byte x'17' is x'00' and an FMH5 follows with no password.<BR /><BR />When the VTAM LU62 application send bind to SNAplus2, the BIND response at byte x'17' is x'12' if the partner_lu definition has conv_security_ver=YES.<BR /><BR />When the VTAM LU62 application send bind to SNAplus2, the BIND response at byte x'17' is x'10' if the partner_lu definition has conv_security_ver=NO.<BR /><BR />In both cases, VTAM application then sends an unwanted password in the FMH5, and the session fails with x'080F6051' sense code.<BR /><BR />Any ideas on how to get SNAplus2 to not set security bits in bind response? Wed, 07 Jul 2004 15:38:42 GMT https://community.hpe.com/t5/operating-system-hp-ux/snaplus2-lu62-bind-security/m-p/3325734#M568009 Kevin O'Connell_1 2004-07-07T15:38:42Z