https://community.hpe.com/t5/operating-system-hp-ux/cannot-see-standby-atm-interface/m-p/3341731#M568331 We have a cluster with ATM-cards. Since we've done some changes in the subnet we had to restart ATM. Now with 1 package on each server, we only see 1 standby interface on one server. I've tried to enable the other interface on the second server, but it doesn't change its status. Has anybody got a clue ? Tue, 27 Jul 2004 00:57:08 GMT Brozza_1 2004-07-27T00:57:08Z https://community.hpe.com/t5/operating-system-hp-ux/cannot-see-standby-atm-interface/m-p/3341731#M568331 We have a cluster with ATM-cards. Since we've done some changes in the subnet we had to restart ATM. Now with 1 package on each server, we only see 1 standby interface on one server. I've tried to enable the other interface on the second server, but it doesn't change its status. Has anybody got a clue ? Tue, 27 Jul 2004 00:57:08 GMT https://community.hpe.com/t5/operating-system-hp-ux/cannot-see-standby-atm-interface/m-p/3341731#M568331 Brozza_1 2004-07-27T00:57:08Z