topic Re: Setting /etc/gettydefs to work correctly in Operating System - HP-UX

Setting /etc/gettydefs to work correctly

Darren Jeffery — Wed, 01 Oct 2003 07:45:07 GMT

I am trying to setup a modem for dialin access. Can get working correctly using a Baud rate of 19200, Data bits of 7, Parity of Even and Stop bits of 1.
I need to get working using Data bits of 8 and Parity of None. Have modified the /etc/gettydefs file changing CS7 to CS8 and removing PARENB. Connect's fine, but shows rublish onscreen.

Can someone please give me the correct settings?

Many Thanks,

Darren

Re: Setting /etc/gettydefs to work correctly

Ken Hubnik_2 — Wed, 01 Oct 2003 07:51:31 GMT

Can you post the line from your inittab file for the modem entry along with the 19200 entry from gettydefs?

Re: Setting /etc/gettydefs to work correctly

Darren Jeffery — Wed, 01 Oct 2003 08:04:35 GMT

inittab line and gettydefs definition. Text file attached.

Re: Setting /etc/gettydefs to work correctly

Ken Hubnik_2 — Wed, 01 Oct 2003 08:17:05 GMT

Here is a copy of our entries and it connects fine.

19200N # B19200 HUPCL IGNPAR ICRNL IXON OPOST ONLCR CS8 CREAD
ISIG ICANON ECHO ECHOK IXANY TAB3
# B19200 SANE CS8 IXANY TAB3 HUPCL
#login: #300
Here is /etc/inittab
a0:3:respawn:/usr/sbin/getty -t 300 -h ttyd1p0 19200N

Re: Setting /etc/gettydefs to work correctly

Darren Jeffery — Wed, 01 Oct 2003 08:37:17 GMT

Still connects at 7 E 1. Is there somewhere else I should look.

Re: Setting /etc/gettydefs to work correctly

Ken Hubnik_2 — Wed, 01 Oct 2003 08:41:04 GMT

The only other thing I could think of would be the modem settings itself.