topic Re: VPAR in Operating System - HP-UX

VPAR

David_492 — Mon, 03 Nov 2003 09:24:42 GMT

Dear all

if I have one HP UNIX server rp8400 how could i do software partion (vpar)OVER THIS SERVER?
Thank you all

Re: VPAR

melvyn burnard — Mon, 03 Nov 2003 09:30:04 GMT

1) Install the Vpar software
2) read the manuals on Vpar at http://docs.hp.com/hpux/os/11i/index.html#Virtual%20Partitions

Please also try to put your threads into hte correct sub-forums on the ITRC. This one should be under Syatem Administration, not Networking, for example.

Re: VPAR

Stefan Farrelly — Mon, 03 Nov 2003 09:54:35 GMT

go to amazon.com and buy the book;

"HP-UX Virtual Partitions" by Poniatowski. Excellent book - the best available documentation on setting up vpars.

Re: VPAR

Thierry Poels_1 — Mon, 03 Nov 2003 10:09:50 GMT

Hi,

installation of vPars is always done on a running system.

- get a system up & running (install HPUX etc.)
- install vPars software
- setup the vPars partitions
- install HPUX on the additional partitions (from an Ignite server)

regards,
Thierry.