topic Re: tftp Error code 2: Access violation in Operating System - HP-UX

tftp Error code 2: Access violation

Russ Hancock_1 — Tue, 07 May 2002 09:46:57 GMT

Please help? This is doing my head in!

I'm new to ignite, and I appear to be having problems getting the client to connect to the ignite server via tftp. I've searched the forums and tried most things suggested , Is there something I've missed?

I get to the point of the install where you initiate the build from the server.

Thanks in advance.
Russ.

Re: tftp Error code 2: Access violation

Clemens van Everdingen — Tue, 07 May 2002 09:59:13 GMT

Hi,

Look at this document and search for tftp.
You will find several issues regarding tftp.

http://docs.hp.com/hpux/pdf/B2355-90738.pdf

C.

Re: tftp Error code 2: Access violation

Clemens van Everdingen — Tue, 07 May 2002 10:01:17 GMT

Hi,

Check also this document on configuring TFTP.

http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/B2355-90147/B2355-90147_top.html&con=/hpux/onlinedocs/B2355-90147/00/00/48-con.html&toc=/hpux/onlinedocs/B2355-90147/00/00/48-toc.html&searchterms=tftp&queryid=20020507-040855

C.

Re: tftp Error code 2: Access violation

G_18 — Tue, 07 May 2002 10:04:50 GMT

PROBLEM
I am running TFTP (Trivial File Transfer Protocol) on my HP-UX 11.0
system. Upon using the 'put' operation I get the following error:

error code 2 access violation with tftp

How can I resolve this error?

CONFIGURATION
Operating System - HP-UX
Version - 11.0
Subsystem - System Administration

RESOLUTION
In this particular case the 'tftp' files are corrupt. The following
patches resolve the error:

PHNE_18377 ftpd
PHNE_20008 ARPA
PHNE_20735 Stream

These patches, as with any patches, may be superseded. Please
check for the latest patches at the Electronic Support Center
(ESC) by using either of these web sites:

http://us-support.external.hp.com

http://europe-support.external.hp.com

This error may also be caused by a file already existing on the
target system. The permissions on this file were such that 'tftp'
could not overwrite the file. If this condition exists, then try
this suggested approach:

1. Move the file to another name.

2. Create a new file name with the touch command.

3. Give the new file the following:

permissions 600
owner tftp
group guest

Re: tftp Error code 2: Access violation

G_18 — Tue, 07 May 2002 10:08:41 GMT

Re: tftp Error code 2: Access violation

Clemens van Everdingen — Tue, 07 May 2002 10:23:09 GMT

Hi,

Do you use the latest version of Ignite ?
If not this could be a better approach !

First try to restart the tftp daemon.
This sometimes helps.

else download the latest version from here:

http://www.software.hp.com/products/IUX/download.html

C.

Re: tftp Error code 2: Access violation

Nick Tarmey_3 — Thu, 16 May 2002 10:01:04 GMT

Hi,

just wanted to add my bit as this problem had my head wrecked for ages:

Firstly the *.cfg file that tftp is trying to grab is located in /archive/B.11.00 on your server. You need to add this path to the /etc/inetd.conf under the tftp section.

when you've done this type inetd -c to re-read the contents of this file and update the path.

Restart ignite and try again.

Good Luck!

Nick.

Re: tftp Error code 2: Access violation

Russ Hancock_1 — Thu, 16 May 2002 11:32:10 GMT

Thanks Nick, this was causing the problem.

Re: tftp Error code 2: Access violation

Donny Jekels — Wed, 30 Jul 2003 11:24:58 GMT

guys theys easiest way to update tftp with a new directory is:

/usr/sbin/setup_tftp

example:
you just added a new build for ignite Ux, and you its a 11.i build with oracle 9.1

/myigniebuilds/9000/800/Rel_B.11.11

then run this line to configure tftp

/usr/sbin/setup_tftp /myignitebuilds/9000/800/Rel_B.11.11

setup_tftp will add the correct entry in /etc/inetd.conf and run inetd -c