PCI Error

Ceesjan van Hattum — Tue, 09 Apr 2002 08:33:21 GMT

1 out of 5 boots, i have a pci-error, disabling a few devices. The pci-error of 0/2 causes init-failures on 0/2/4 and 0/2/5 (sam slot interfaces for X25 cards), but not for devices like 0/2/7/1, used for scsi.
My syslog.log also shows that MTBF (mean time between failures) are acceptable. Meanwhile my devices fail and therefor not acceptable for me.

Can anybody tell me what my actual problem is and why it only occures between 10% and 20% of my boots ??

------part of syslog.log:

Apr 8 14:58:22 hostname vmunix: 0/2/5/0 syncio^M
Apr 8 14:58:31 hostname vmunix: 0/3/4/0 syncio^M
Apr 8 14:58:40 hostname vmunix: 0/3/5/0 syncio^M
Apr 8 14:59:10 hostname vmunix: SRA[FTS,c0] (0/2) PCI Error/Abort Condition (gambit = 1)
Apr 8 14:59:10 hostname vmunix: SRA[FTS,c0] (0/2) sam_test = 0x2040, sam_status = 0x10000, pci_error = 0x82060000, iova_error = 0x40002018
Apr 8 14:59:10 hostname vmunix: SRA[FTS,c0] (0/2) Host Access Problem
Apr 8 14:59:10 hostname vmunix: SRA[FTS,c0] (0/2/4) Board Broken; State Reg=0x2
Apr 8 14:59:10 hostname vmunix: SRA[FTS,c0] (0/2/4) fts_handle_disable: old_fault_code = 0, flags = 0x0 code = 0
Apr 8 14:59:10 hostname vmunix: SRA[FTS,c0] (0/2/4) Disabling Device on Maintenace Fault
Apr 8 14:59:10 hostname vmunix: SRA[FTS,c0] (0/2/4) Disabling
Apr 8 14:59:15 hostname vmunix: SRA[FTS,c0] (0/2/4) turning red_light on
Apr 8 14:59:15 hostname vmunix: SRA[FTS,c0] (0/2/4) MTBF Acceptable, (re)enabling
Apr 8 14:59:15 hostname vmunix: SRA[FTS,c0] (0/2/4) Enabling
Apr 8 14:59:24 hostname vmunix: SRA[HRSD] hrsd:1973:hrsdopen: rsd_slot_list = NULL for pci_slot 4^M
Apr 8 14:59:24 hostname vmunix: SRA[HRSD] hrsd:1973:hrsdopen: rsd_slot_list = NULL for pci_slot 5^M
Apr 8 14:59:27 hostname vmunix: SRA[FTS,c0] (0/2/4) turning red_light off
Apr 8 14:59:27 prodob2 vmunix: SRA[FTS,c0] (0/2) PCI Error/Abort Condition (gambit = 1)
Apr 8 14:59:24 hostname vmunix: SRA[HRSD] hrsd:1973:hrsdopen: rsd_slot_list = NULL for pci_slot 4^M
Apr 8 14:59:27 hostname above message repeats 8 times
Apr 8 14:59:27 hostname vmunix: SRA[FTS,c0] (0/2) sam_test = 0x2040, sam_status = 0x10000, pci
_error = 0x82060000, iova_error = 0x4c002018
Apr 8 14:59:24 hostname vmunix: SRA[HRSD] hrsd:1973:hrsdopen: rsd_slot_list = NULL for pci_slot 5^M
Apr 8 14:59:27 hostname above message repeats 4 times
---

Re: PCI Error

Clemens van Everdingen — Tue, 09 Apr 2002 08:39:26 GMT

Ceesjan,

What type of machine is this ?
Might be a HW issue or a Firmware issue !

Clemens

Re: PCI Error

Ceesjan van Hattum — Tue, 09 Apr 2002 08:53:49 GMT

It is a Stratus DNCP-400-CO.
A so called fault tolerant system.

Re: PCI Error

Clemens van Everdingen — Tue, 09 Apr 2002 09:43:06 GMT

Ceesjan,

I believe this is a Lucent box running hp-ux !
Did you contact Lucent about this ?

I could not find anything specific to these boxes.

Clemens.

topic Re: PCI Error in Operating System - HP-UX

PCI Error

Re: PCI Error

Re: PCI Error

Re: PCI Error