topic SAM NIC & general error in Operating System - HP-UX

SAM NIC & general error

John Ferrara — Thu, 01 May 2003 13:42:18 GMT

I have recently updated 10.20 to the 12/2001 general release (yes, I know I'm a little behind on patches) on a K210 server (yes, I know it's an old box). I'm receiving 2 SAM errors:
1. There is an X windows error (see attachment)
2. More inportantly, I can not change speed or duplex settings on 1 of the NICs.(see attchment on next submit)

I followed the instructions on the NIC error (copty /usr/newconfig/etc/rc.config.d) and the NICs failed to respond and I copied back the old drivers. Then I tried to lanadmin -X 100FD 4 to make the NIC full duplex @ 100mb & it crashed the NIC again. I rebooted, and everything worked, but the NIC is set @ 100HD, while the switch port is 100FD. This is causing some errors:

netstat -rn
Routing tables
Destination Gateway Flags Refs Use Interface Pmtu PmtuTime
127.0.0.1 127.0.0.1 UH 0 468 lo0 4608
158.31.221.111 127.0.0.1 UH 0 173 lo0 4608
158.31.221.245 127.0.0.1 UH 2 285 lo0 4608
default 158.31.221.1 UG 55 2633624 lan1 1500
158.31.221.0 158.31.221.111 U 0 40770 lan1 1500
158.31.221.128 158.31.221.245 U 5 2105604 lan0 1500

Please help!

John

Re: SAM NIC & general error

John Ferrara — Thu, 01 May 2003 13:44:31 GMT

attached is the SAM NIC error msg.

Re: SAM NIC & general error

Pete Randall — Thu, 01 May 2003 13:49:12 GMT

John,

For your nic problem, manually edit the appropriate config file to set the speed/duplex according to the driver for your card:
btlan hpbtlanconf
btlan0 hpeisabtconf
btlan1 hpbasetconf
btlan3 hpbase100conf
btlan4 hpgsc100conf
btlan5 hppci100conf
btlan6 hpsppci100conf

Pete

Re: SAM NIC & general error

Steven E. Protter — Fri, 02 May 2003 14:03:00 GMT

speed is set in files like /etc/rc.config.d/hpbtlanconf

Example.

HP_BTLAN_INTERFACE_NAME[0]=lan0
HP_BTLAN_STATION_ADDRESS[0]=
HP_BTLAN_SPEED[0]=10HD
HP_BTLAN_INTERFACE_NAME[1]=lan1
HP_BTLAN_STATION_ADDRESS[1]=
HP_BTLAN_SPEED[1]=100FD

Good luck.

http://www.isnamerica.com
Call me anything you want, but don't forget to call me to dinner.
Steven E. Protter