https://community.hpe.com/t5/operating-system-hp-ux/dtc-16mx-problems/m-p/2900878#M578364 If you are running HP-UX 10.20, then you can't communicate to DTC through 100Base-TX lan cards.<BR /><BR />The problem is corrected in HP-UX 11.00.<BR /><BR />If the problem is can not find lan interface, then look in /etc/rc.config.d/netconf and be sure the correct lan interface device is being used.<BR /><BR />HTH<BR /><BR />-- Rod Hills Mon, 10 Feb 2003 16:10:35 GMT Rodney Hills 2003-02-10T16:10:35Z https://community.hpe.com/t5/operating-system-hp-ux/dtc-16mx-problems/m-p/2900877#M578363 Last week it installs a card HSC 100 Base-TX in my team HP 9000 D390. After activating the card I am presented a problem with my DTC 16MX. The software "DTC Manager UX" it cannot communicate to this team and for it all the terminals, printers don't work. <BR /> <BR />The demon "rbootd" he/she doesn't get up, the error that shows is: <BR /> <BR />Hi,<BR /><BR />Mon Feb 10 11:20:41 2003: STARTUP <BR />Mon Feb 10 11:20:41 2003: cannot continued; not lan interfaces availableMon Feb 1 <BR />0 11:20:41 2003: TERMINATING <BR /> <BR />That it can be happening?<BR /><BR />Thanks. Mon, 10 Feb 2003 16:07:08 GMT https://community.hpe.com/t5/operating-system-hp-ux/dtc-16mx-problems/m-p/2900877#M578363 Orlando De Oliveira R 2003-02-10T16:07:08Z https://community.hpe.com/t5/operating-system-hp-ux/dtc-16mx-problems/m-p/2900878#M578364 If you are running HP-UX 10.20, then you can't communicate to DTC through 100Base-TX lan cards.<BR /><BR />The problem is corrected in HP-UX 11.00.<BR /><BR />If the problem is can not find lan interface, then look in /etc/rc.config.d/netconf and be sure the correct lan interface device is being used.<BR /><BR />HTH<BR /><BR />-- Rod Hills Mon, 10 Feb 2003 16:10:35 GMT https://community.hpe.com/t5/operating-system-hp-ux/dtc-16mx-problems/m-p/2900878#M578364 Rodney Hills 2003-02-10T16:10:35Z