topic Re: Domain Changing in Operating System - HP-UX

Domain Changing

Jim Lynn_1 — Thu, 20 Feb 2003 20:34:03 GMT

We are changing the domain with the next network upgrade. Is the only change for domain name in the named.boot file and the resolv.conf ?

Re: Domain Changing

Ross Zubritski — Thu, 20 Feb 2003 20:38:23 GMT

Don't forget /etc/hosts ;)

Regards

RZ

Re: Domain Changing

Sridhar Bhaskarla — Thu, 20 Feb 2003 20:43:20 GMT

Hi Jim,

If you are talking about DNS clients, then there would be no named.boot. Just change resolv.conf to point to the new domain. If you hardcoded your /etc/hosts file, then you will need to change it too.

If you are talking about DNS server, then you will need to regenerate your named.boot by running hosts_to_named.

-Sri

Re: Domain Changing

Steven E. Protter — Thu, 20 Feb 2003 20:52:44 GMT

It is possible under HP-UX to go to fully qualified host names.

for example server frack becomes frack.yourdomain.net

change /etc/rc.confid.d/netconf and the job is done.

All of the above posted steps are required as well.

If any of your UX boxes do DNS I recommend going with Bind 9.2.1

https://payment.ecommerce.hp.com/cgi-bin/swdepot_parser.cgi/cgi/try.pl?productNumber=BIND9.2&date=

SEP

Re: Domain Changing

Wilfred Chau_1 — Fri, 21 Feb 2003 00:42:57 GMT

If you have configure a DNS,
you need to change the following:

1) vi /etc/named.data/param

change -d domain.old
to
-d domain.new

2) vi named.boot on secondary DNS

3) check uname -a & hostname
if you see the old domain, of course, change it. :-)

4) /etc/hosts