topic Re: 100VG AnyLan is not working after upgrade in Operating System - HP-UX

100VG AnyLan is not working after upgrade

Sachin Patel — Tue, 15 Oct 2002 15:08:25 GMT

I just install new OS 11.00 from Dec-2000 Cd on K-class system. Where is the driver for 100Vg Anylan card.

Here is the output of my swlist so far
A3402A B.11.00.02 EISA 100VG-AnyLAN/9000
A3659A B.11.00.07 EISA FDDI/9000 Driver for Servers
B5502BA B.11.00.07 EISA FDDI/9000 Driver for Workstations
HPUXEng32RT B.11.00.01 English HP-UX 32-bit Runtime Environment
HWE1100 B.11.00.0112.7 Hardware Enablement Patches for HP-UX 11.00, December 2001
J2694BA B.11.00.02 EISA 100VG-AnyLAN/9000
QPK1100 B.11.00.54.7 Quality Pack for HP-UX 11.00, September 2001
UXCoreMedia B.11.00.02 HP-UX Media Kit (Reference Only. See Description)
UnlimUserLic B.11.00.02 HP-UX Unlimited-User License
XSWGR1100 B.11.00.47.08 General Release Patches, November 1999 (ACE)

Here is the output of lanscan
Hardware Station Crd Hdw Net-Interface NM MAC HP-DLPI DLPI
Path Address In# State NamePPA ID Type Support Mjr#
10/12/6 0x080009DAC455 0 UP lan0 snap0 1 ETHER Yes 119

Is there something else I have to install or do something else?

Sachin

Re: 100VG AnyLan is not working after upgrade

Sachin Patel — Tue, 15 Oct 2002 15:12:18 GMT

This was my old lanscan while we have 10.20 OS

10/16/8 0x000077899703 1 up ivg1 up 4 ETHER yes 75
10/12/6 0x0800009DAC455 1 UP lan0 DOWN 5 ETHER Yes 52

Sachin

Re: 100VG AnyLan is not working after upgrade

Ashwani Kashyap — Tue, 15 Oct 2002 15:20:58 GMT

Are u sure , your NIC card is EISA based and not HPPB or HSC based . I am not aware that K class supports EISA bus .

Re: 100VG AnyLan is not working after upgrade

Sachin Patel — Tue, 15 Oct 2002 15:23:56 GMT

What is the driver for HPPB card?

Sachin

Re: 100VG AnyLan is not working after upgrade

Sachin Patel — Tue, 15 Oct 2002 15:26:22 GMT

You right it is HP-PB card.
Where can I find a driver

This was swlist when I have 10.20
IVG_Driver SX00156-A07 Interface HP-PB 100Vg Driver

Sachin

Re: 100VG AnyLan is not working after upgrade

Ashwani Kashyap — Tue, 15 Oct 2002 15:29:08 GMT

THe driver should be on the first CD of the applicationd CD's pack . It could be codeword protected . If thats the case get the codewords from HP .

You can also try on www.software.hp.com and search for your driver .

Re: 100VG AnyLan is not working after upgrade

Technical Support_2 — Tue, 15 Oct 2002 16:15:48 GMT

I can't find it. doyou have name, number of this driver anything?

Sachin

Re: 100VG AnyLan is not working after upgrade

David Bell_1 — Tue, 15 Oct 2002 18:48:24 GMT

Sachin,

It would appear that this is an Interphase card. Although perhaps marketed by HP, the card and driver were created there. I'm unable to find ANY documentation on the HP-PB version with the exception of one used in MPE/iX (HP's 3000 line if you're unfamiliar). All other references are to the EISA version used in the D-Class.

In going to Interphase Corp site, there is nothing available for drivers beyond HP-UX 10.X. If you'd like to look at the information that was available such as the users guide, it's at the following URL and ftp site.

http://www.iphase.com/docs/pdfs/userguides/5022-000UG.pdf

ftp://ftp.iphase.com/pub/ethernet/hppb/

HTH,

Dave