topic Re: DLKM module debugging with q4 in Operating System - HP-UX

DLKM module debugging with q4

Kallol Biswas — Wed, 21 Aug 2002 13:09:29 GMT

Is it possible to debug DLKM modules with q4? If so
how?

--
Need to develop a network or SCSI drivers on
HP-UX or Linux? Ask NucleoDyne.
www.nucleodyne.com
nucleo@nucleodyne.com
nucleodyne@directvinternet.com

Re: DLKM module debugging with q4

Sajid_1 — Wed, 21 Aug 2002 13:15:45 GMT

A helpful document:
http://support1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000062686747

Doc ID - WP110005

Re: DLKM module debugging with q4

Kallol Biswas — Wed, 21 Aug 2002 13:29:09 GMT

Thank you for the reply. The
document tells that DLKM will be supported, probably it is
supported now. Is it possible to get the latest q4 package?

Re: DLKM module debugging with q4

Sajid_1 — Wed, 21 Aug 2002 13:37:06 GMT

Hi again,

I am not very good in q4 analysis, but this document will give you more information about it:
http://support1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000062650926

Doc ID - OZBEKBRC00000611