topic Re: xdmcp query in Operating System - HP-UX

xdmcp query

Pedro Bueno García — Mon, 15 Jul 2002 09:52:00 GMT

Hello

How can I make query to xdmcp opening the port via socket and where found then commands handshake for this port. Can I make querys from telnet opening the port or I need other tool?

Kind Regards

Re: xdmcp query

U.SivaKumar_2 — Mon, 15 Jul 2002 10:12:45 GMT

Hi,
telnet x.x.x.x 6000
would connect to the X server.
But i think you will not be able to give ascii commands as
it will need special control
chracters and bits for XDMCP
negotiation.

regards,
U.SivaKumar

Re: xdmcp query

Pedro Bueno García — Mon, 15 Jul 2002 12:02:15 GMT

Yes this is my question. I don't know the commands to establish the negotiation.

Re: xdmcp query

Steve Steel — Mon, 15 Jul 2002 13:10:36 GMT

Hi

You want to do what with XDMCP.

Run it on another X display or PC

Please describe environment

Steve Steel

Re: xdmcp query

Pedro Bueno García — Mon, 15 Jul 2002 13:48:12 GMT

Hi Steve,

I want to open, from my PC windows 2000, the xdmcp port (6000, 177, or whatever) and ask for the xdmcp session servers availables in my network, to emulate the dtchooser in my PC.

Re: xdmcp query

Steve Steel — Mon, 15 Jul 2002 14:13:19 GMT

Hi

Get reflection exceed or a similar X emulator.

XDMCP must come from the client not from the server.

Example on UX

/usr/bin/X11/X -query 15.160.35.105 -fp tcp/15.160.35.105:7000 -terminate &

Example ON Linux

#get a chooser
#X :$2 -indirect $1 -fp tcp/topaz:7000 -once -terminate &
#parameters hp-uxbox n[ where n=1-3]
#
#example choosecde topaz 1
#
#note you also should give a fontserver
#
X :$2 -indirect $1 -fp tcp/topaz:7000 &
exit

#get direct cde login
#
#parameters hp-uxbox n[ where n=1-3]
#
#example choosecde topaz 1
#
#note you also should give a fontserver
#
X :$2 -query $1 -fp tcp/topaz:7000 -once -terminate &
exit

Steve Steel

Re: xdmcp query

Pedro Bueno García — Mon, 15 Jul 2002 15:16:23 GMT

OK Steve,

I have Reflection on my PC but if I configure it to connect to indirect mode and to try the first server responding don't have the less load server to connect to.

I want to make a "load balancing" system depending of the load of the system to which I connect.

My idea is to make a connection program that launches the X emulator.

Re: xdmcp query

Wodisch_1 — Mon, 15 Jul 2002 20:37:02 GMT

Hi Pedro,

I guess your problem is simply to use the wrong transport protocol:
X11 uses TCP/6000
but XDMCP uses UDP/177, IIRC...
And TELNET cannot do UDP, only TCP :-(

Get yourself a copy of the "xdm" (X Display Manager" ) from the X-Consortium or a Linux/*BSD CD-ROM to study the source.

HTH,
Wodisch

Re: xdmcp query

Pedro Bueno García — Tue, 16 Jul 2002 05:24:29 GMT

Hi Wodisch,

I can open whichever port in whichever mode (TCP or UDP) with Visual Basic. My problem is to know the protocol handshake to comunicate with XDMCP.

Re: xdmcp query

Steve Steel — Tue, 16 Jul 2002 06:39:32 GMT

Hi

, fall back to using vanilla X protocol
- Start Reflection in non-XDMCP mode, then from the Unix host start a term
with the display directed to your PC's IP address. If this doesn't work you
probably have an "access restriction" issue or else a name/address resolution problem.

Steve Steel

Re: xdmcp query

Pedro Bueno García — Tue, 16 Jul 2002 07:39:35 GMT

Hi Steve,

I don't understand your reply I don't know what is the relation with the comunication to xdmcp.

kind regards