topic Re: Performance numbers on lan0 in Operating System - HP-UX

Performance numbers on lan0

John T. Mills — Tue, 16 Jul 2002 14:38:28 GMT

I have a 10/100 Mbps intergrated NIC in my HP9000. I wanted to determine the raw number of bytes that are going across it at any given time.

'netstat -I lan0' will return incoming and outgoing packets on the interface, but how do I determine the bytes?

Thanks in advance,

John

Re: Performance numbers on lan0

Juan González — Tue, 16 Jul 2002 14:44:10 GMT

Hi John,
you can get the Inbound Octets, Outbound Octets and other statistics with lanadmin.

Best regards
Juan

Re: Performance numbers on lan0

John T. Mills — Tue, 16 Jul 2002 14:49:21 GMT

Well perhaps I should clarify that I am looking for a command line answer. I understand I can enter:

# lanadmin
Enter command: lan
Enter command: display

Is there another way to get this result from a single command?

Thanks,

John

Re: Performance numbers on lan0

Sridhar Bhaskarla — Tue, 16 Jul 2002 14:50:16 GMT

Hi John,

As far as my knowledge goes, all the default commands show only the packets on the interface. Packets can be of variable sizes.

You can either problem SNMP data or install any other third party tools like ethereal to get a snapshot of the utilization.

-Sri

Re: Performance numbers on lan0

Sridhar Bhaskarla — Tue, 16 Jul 2002 15:09:48 GMT

In fact Juan is correct. You can get octets from lanadmin command. It went out of my head completely. You can use the following to get a non-interactive output of lanadmin.

#(echo lan; echo ppa 2; echo display; echo ""; echo quit) |lanadmin > /tmp/lanadmin.out

You can grep octets from lanadmin.out.

-Sri

Re: Performance numbers on lan0

Juan González — Tue, 16 Jul 2002 15:22:12 GMT

To get with a single command:

lanadmin -g PPA|grep "^Inbound Octets"

where PPA is the number that follows lan:
lan0-->0
lan1-->1
..

Therefore, if you want to get graphics of this I would recommend you MRTG. With it you can get graphics over time of any SNMP variable (numeric of course) in html format.

Best regards,
Juan