topic Re: How to set my domainname? in Operating System - HP-UX

How to set my domainname?

Yogeeraj_1 — Mon, 15 Apr 2002 10:06:24 GMT

Hello experts,

a simple question.

How do i set my domain name?

i have observed that when i set my domain and hostname using the command line and restart the server at a later stage i lose the settings.

E.g.
# domainname

# hostname
L1000

i guess these values should be set in some configuration files.

(in linux, i recall having modified /etc/sysconfig/network)

i am running HP-UX 11

Thank you for a reply.

Best Regards
Yogeeraj

Re: How to set my domainname?

Emiel van Grinsven — Mon, 15 Apr 2002 10:09:44 GMT

Hi,

modify /etc/hosts.

HTH, E.

Re: How to set my domainname?

Clemens van Everdingen — Mon, 15 Apr 2002 10:10:17 GMT

Hi,

run set_parms addl_netwrk

C.

Re: How to set my domainname?

Rainer von Bongartz — Mon, 15 Apr 2002 10:13:00 GMT

you can use domainname to set or display your domainname

so domainname
will set this parameter

Regards

Rainer

Re: How to set my domainname?

Emiel van Grinsven — Mon, 15 Apr 2002 10:14:15 GMT

Hmm, it seems I wasn't thinking.
You should use
#> domainname

see manpages for syntax.

Grt, E.

Re: How to set my domainname?

U.SivaKumar_2 — Mon, 15 Apr 2002 10:19:00 GMT

hi,
if you want to set your domainname permanently to exist even after system reboot do this
put the domainname for DNS in the configuration file /etc/rc.config.d/namesvrs
regards,
U.SivaKumar

Re: How to set my domainname?

CHRIS_ANORUO — Mon, 15 Apr 2002 10:23:09 GMT

Hello,

Go through SAM->Network->etc
You can set up the doamin name and copy nss* files or update them in /etc

Re: How to set my domainname?

Yogeeraj_1 — Mon, 15 Apr 2002 10:28:31 GMT

hello all,

thank you the fast reply!

i did use the domainname command to set my Domain Name ;)

But, when i restarted the server it was gone!!
Why?

please..

Regards
Yogeeraj

Re: How to set my domainname?

Emiel van Grinsven — Mon, 15 Apr 2002 10:31:31 GMT

Hi,

the domainname is set at boottime.
The domain name is usually
set in the configuration file /etc/rc.config.d/namesvrs, by setting
the NIS_DOMAIN variable.

HTH, EMiel

Re: How to set my domainname?

Marc Dijkstra — Mon, 15 Apr 2002 10:34:37 GMT

Degambur

I assume you are talking about the BIND domain name?

Are you registered in the appropriate xxxxx.mu domain as l1000? Once this is ascertained the domain name and DNS is kept in the /etc/resolv.conf file (forward and reverse lookup zones), this is set simply by running set_parms addl_netwrk. If you are having the typical sendmail errors jumping up the screen and you do not necessarily need to be in a domain, then you can put a dummy entry as an alias in your /etc/hosts file.

Regards
MND

Re: How to set my domainname?

U.SivaKumar_2 — Mon, 15 Apr 2002 10:36:08 GMT

hi,
if u set domain name by domainname command and reboot you will lose the domainname setting.
edit /etc/rc.config.d/namesvr and put your domain name there.
Also for dns
edit /etc/resolv.conf
domain "yourdomainname"
nameserver "yournameserver"
regards,
U.SivaKumar

Re: How to set my domainname?

Clemens van Everdingen — Mon, 15 Apr 2002 10:37:16 GMT

Hi,

Still keeping up with my first remark.

set_parms addl_netwrk ...... should do the trick.

C.

Re: How to set my domainname?

Marcin Wicinski — Mon, 15 Apr 2002 10:39:34 GMT

Hi,
domainname is used only while NIS is configured. If you do not need NIS you can set domain name in: /etc/hosts and /etc/resolv.conf files (in resolv.conf you have to write: domain )

Later,

Re: How to set my domainname?

Yogeeraj_1 — Mon, 15 Apr 2002 10:41:17 GMT

Hello Mr. U.SivaKumar,

Thank you for your reply.

i went through the /etc/rc.config.d/namesvrs

my NIS_DOMAIN is blank!

is this the only value that should be set?
how do i activate it after the modification?

thank you again for a reply

Regards
Yogeeraj
==============================================
L1000: sbin>more /etc/rc.config.d/namesvrs
unset UNIX95
PRE_U95=true;export PRE_U95;

##############################################
# named (BIND) configuration. See named(1m). #
##############################################
#
# Name server using the Domain Name System (DNS) protocol (RFC 1034/1035)
#
# NAMED: Set to 1 to start nameserver daemon.
# NAMED_ARGS: Arguments to the nameserver daemon
#
# Configuration of a named boot file (e.g. /etc/named.boot) is needed for
# successful operation of the name server.
#
NAMED=0
NAMED_ARGS=""

##########################################################
# NIS (YP) configuration. See domainname(1), ypserv(1m) #
##########################################################
#
# Name server using Network Information Service protocol (Sun's ONC)
#
# NIS_MASTER_SERVER: 1 if this node is the master NIS server, 0 if not.
# NIS_SLAVE_SERVER: 1 if this node is a slave NIS server, 0 if not.
# NIS_CLIENT: 1 if this node is a NIS client, 0 if not.
# NISPLUS_SERVER: 1 if this node is a NIS+ server, 0 if not.
# NISPLUS_CLIENT: 1 if this node is a NIS+ client, 0 if not.
# EMULYP: -Y to have rpc.nisd support YP clients.
# NISDOMAIN: the NIS domain name (see domainname(1)).
# NISDOMAIN_ERR: ???
# MAX_NISCHECKS= max number of bind attempts the NIS client will make
# YPSERV_OPTIONS command line options for ypserv
# YPBIND_OPTIONS command line options for ypbind
# YPPASSWDD_OPTIONS command line options for yppasswdd
# KEYSERV_OPTIONS command line options for keyserv
# YPUPDATED_OPTIONS command line options for ypupdated
# YPXFRD_OPTIONS command line options for ypxfrd
# RPC_NISD_OPTIONS command line options for rpc.nisd
# NIS_CACHEMGR_OPTIONS command line options for nis_cachemgr
# YPSET_ADDR IP addr or name of NIS server. Must set YPBIND_OPTIONS
# to "-ypset"
#
# Note: - NIS_MASTER_SERVER and NIS_SLAVE_SERVER are mutually exclusive,
# i.e., only one, not both, should be set if either is set.
# - All NIS servers must also be NIS clients, so if you set either
# NIS_MASTER_SERVER or NIS_SLAVE_SERVER to 1, you should set
# NIS_CLIENT to 1, too.
# - Refer to NFS administration manual and ypinit(1M) for the
# steps required to create NIS servers.
#
# MAX_NISCHECKS
# The maximum number of bind attempts the
# NIS client will make for a NIS server to be
# available before shuting down NIS and
# booting without it. This value should
# not be less than 2.
#
NIS_MASTER_SERVER=0
NIS_SLAVE_SERVER=0
NIS_CLIENT=0
NISPLUS_SERVER=0
NISPLUS_CLIENT=0
NIS_DOMAIN=
MAX_NISCHECKS=2
EMULYP=""
YPSERV_OPTIONS=""
YPBIND_OPTIONS=""
YPPASSWDD_OPTIONS="/etc/passwd -m passwd PWFILE=/etc/passwd"
KEYSERV_OPTIONS=""
YPUPDATED_OPTIONS=""
YPXFRD_OPTIONS=""
RPC_NISD_OPTIONS="$EMULYP"
NIS_CACHEMGR_OPTIONS=""
YPSET_ADDR=""
L1000: sbin>

Re: How to set my domainname?

Clemens van Everdingen — Mon, 15 Apr 2002 10:44:00 GMT

Hi,

use set_parms because this is filling all the files correctly and makes no accidental editing mistakes.
After that al works fine.
All Marcin gave are coorect as well.

C.

Re: How to set my domainname?

U.SivaKumar_2 — Mon, 15 Apr 2002 10:48:54 GMT

hi,

NIS_DOMAIN=example.domain.co.in.

put your own domain

regards,
U.SivaKumar

Re: How to set my domainname?

Yogeeraj_1 — Mon, 15 Apr 2002 11:06:04 GMT

hello everybody,
thank you all for having contributed.

As far as what i recall, i don't have NIS configured on my Box. (Marc Dijkstra and Marcin Wicinski)

i think i'll get the correct command for:
set_parms addl_netwrk

(
L1000: sbin>man set_parms
No manual entry for set_parms.
)

and try it.

i am closing this and will be assigning points shortly..sorry if i make some of you unhappy.... ;)

Best Regards
Yogeeraj

Re: How to set my domainname?

U.SivaKumar_2 — Mon, 15 Apr 2002 11:18:09 GMT

hi,

For set_parms man page
try this
#man 1m set_parms

addl_netwrk :

Allows the user to set the subnet mask, which defines the network and local portions of a network address, the default routing gateway, and define access to the Domain Name System (DNS) and Network Information service. A reboot is required for everything to take effect in the non-first-boot case.

regards,
U.SivaKumar

Re: How to set my domainname?

Emiel van Grinsven — Mon, 15 Apr 2002 11:22:59 GMT

Hi,

When you give the command it's interactive. No need for manpages I think ...

just try it, you can always stop without making changes

E.

Re: How to set my domainname?

Clemens van Everdingen — Mon, 15 Apr 2002 11:23:39 GMT

Hi,

By assigning point I should become clear what the magic answer was !

Is set_parms addl_netwrk teh command you used or was it something else ?

C.