https://community.hpe.com/t5/operating-system-hp-ux/bindings-for-token-ring/m-p/2710027#M587571 DO you have SNAPlus2 Installed? There is an extra menu option in SAM for configuring SNA once SNAPlus2 is installed.<BR /><BR />HTH<BR /><BR />Duncan Wed, 24 Apr 2002 20:02:16 GMT Duncan Edmonstone 2002-04-24T20:02:16Z https://community.hpe.com/t5/operating-system-hp-ux/bindings-for-token-ring/m-p/2710026#M587570 We have a series 800 server running 10.20. It is currently running IP using the integrated ethernet NIC. We want to add a Token Ring NIC for SNA connectivity via DLC. When we add the system to the ring, the default gateway changes to "localhost" and when we try to change it, it gives an error that states "entry in use" We are unable to ping outside of the subnet unless we disconnect the cable from the NIC. We do not want to use IP on the token-ring, only DLC. How do I change the bindings? Wed, 24 Apr 2002 12:57:48 GMT https://community.hpe.com/t5/operating-system-hp-ux/bindings-for-token-ring/m-p/2710026#M587570 Wayne Moore_1 2002-04-24T12:57:48Z https://community.hpe.com/t5/operating-system-hp-ux/bindings-for-token-ring/m-p/2710027#M587571 DO you have SNAPlus2 Installed? There is an extra menu option in SAM for configuring SNA once SNAPlus2 is installed.<BR /><BR />HTH<BR /><BR />Duncan Wed, 24 Apr 2002 20:02:16 GMT https://community.hpe.com/t5/operating-system-hp-ux/bindings-for-token-ring/m-p/2710027#M587571 Duncan Edmonstone 2002-04-24T20:02:16Z