topic Re: adding a route problems.... in Operating System - HP-UX

adding a route problems....

Mike Barron_3 — Mon, 05 Nov 2001 15:35:27 GMT

Ok,

Im adding a route to my server...

route add 2

It takes the route just fine. The problem is when I do a traceroute , it doesn't use the gateway I assigned it, It uses the default one for the system which is what I dont want. Leaving the distant network unreachable....

Any ideas?

Re: adding a route problems....

Craig Rants — Mon, 05 Nov 2001 15:37:38 GMT

What does your routing table say after you add the route. If you could put that in your message that would help out.

C

Re: adding a route problems....

Mike Barron_3 — Mon, 05 Nov 2001 15:42:05 GMT

10.1.29.0 208.153.15.250 UGH 0 0 lan1 1500
localhost localhost UH 0 0 lo0 4608
denusdb1 localhost UH 8 78547 lo0 4608
default 208.153.15.1 UG 17 4779898 lan1 1500

Looks fine....

The funny thing is The other server's routing table are set the same, and I can reach it on that server...

Re: adding a route problems....

Sanjay_6 — Mon, 05 Nov 2001 15:49:15 GMT

Hi Mike,

Hope this thread will help.

http://us-support.external.hp.com/cki/bin/doc.pl/sid=ba1f3c7410eb361bd3/screen=ckiDisplayDocument?docId=200000049791567

Hope this helps.

Regds

Re: adding a route problems....

Christopher Caldwell — Mon, 05 Nov 2001 15:51:49 GMT

Can you post your IP and mask (and the mask you used to build the route)?

Re: adding a route problems....

Mike Barron_3 — Mon, 05 Nov 2001 15:53:38 GMT

Ding Ding Ding Thanks for the help Sanjay, That thread did it. I was missing the "net" option... You get a 10!

Re: adding a route problems....

G. Vrijhoeven — Mon, 05 Nov 2001 15:56:48 GMT

Hi,

Try:

ifconfig lan0 | grep inet | awk '{print $2,$4}'

hope this will help

Gideon

Re: adding a route problems....

harry d brown jr — Mon, 05 Nov 2001 16:00:12 GMT

Can you do a "netstat -rnv" so that we can see the metmasks also?

thanks,

live free or die
harry